UniMAT

Программируемые логические контроллеры:

Серия UN 200

CPU224 AC/DC/RLY
  • Высокая скорость вычислений и обработки данных
  • 14 цифровых входов/10 цифровых выходов
  • 2 аналоговых входа/1 аналоговый выход
  • Порты связи: 2 RS485 (с поддержкой PPI)
  • Модули расширения: до 7 модулей ввода/вывода
  • Размер "образа" цифрового ввода/вывода - 256(128 вход/128 выход)
  • Размер "образа" аналогового ввода/вывода - 64(32 вход/32 выход)
  • Большой объем памяти: программная память - 20Кб, память для хранения данных - 10Кб
  • Простая в настройке и интуитивная понятная поддержка ПИД-регулирования, облегчающая реализацию многоканального ПИД-управления.
  • Долговременная FLASH-память хранит данные до 10 лет
  • Уникальный итеративный алгоритм шифрования AES, защищающий интеллектуальную собственность клиентов


CPU224XP AC/DC/RLY
  • Высокая скорость вычислений и обработки данных
  • 14 цифровых входов/10 цифровых выходов
  • 2 аналоговых входа/1 аналоговый выход
  • Порты связи: 2 порта RS-485, стандартный порт PPI, поддержка связи Free/Modbus
  • Модули расширения: до 7 модулей ввода/вывода
  • Размер "образа" цифрового ввода/вывода - 256(128 вход/128 выход)
  • Размер "образа" аналогового ввода/вывода - 64(32 вход/32 выход)
  • Большой объем памяти: программная память - 20Кб, память для хранения данных – до 20Кбв зависимости от модели.
  • Простая в настройке и интуитивная понятная поддержка ПИД-регулирования, облегчающая реализацию многоканального ПИД-управления.
  • Долговременная FLASH-память хранит данные до 10 лет.
  • Уникальный итеративный алгоритм шифрования AES, защищающий интеллектуальную собственность клиентов.


CPU 226
  • Высокоскоростные вычисления и обработка данных.
  • Встроены 24DI/16DO
  • Коммуникационные порты: до 3-х портов RS-485, 2 стандартных портов PPI в зависимости от модели.
  • Модули расширения: макс. разрешено: 7 модулей ввода/вывода
  • Поддержка 256 цифровых и 64 аналоговых сигналов
  • Больше пользовательского хранилища: хранилище программ: 20 КБ, хранилище пользовательских данных: 10 КБ
  • Встроенная простая и гибкая подфункция ПИД-регулятора, что упрощает пользователям реализацию многоканального ПИД-управления.
  • Применение долговременного хранения данных во флэш-памяти при отключении питания, отсутствие необходимости в источнике питания, может сохранять данные в течение 10 лет.
  • Уникальный альтернативный алгоритм шифрования AES, защищающий интеллектуальную собственность клиентов.


CPU 284
  • Высокоскоростные вычисления и обработка данных
  • Локальный цифровой 14DI/10DO
  • Коммуникационные порты: три RS485, поддержка PPI Master.
  • Модули расширения: макс. разрешено: 7 модулей ввода/вывода
  • Поддерживает 256 цифровых и 64 аналоговых канала
  • Больше пользовательского хранилища: хранилище программ: 20КБ, хранилище пользовательских данных: 10 КБ
  • Встроенная простая и гибкая подфункция PID, позволяющая пользователям более удобно реализовывать многоканальное PID-управление.
  • Применение долговременного хранения данных во флэш-памяти при отключении питания, отсутствие необходимости в источнике питания, может сохранять данные в течение 10 лет.
  • Уникальный альтернативный алгоритм шифрования AES, защищающий интеллектуальную собственность клиентов.


CPU 286
UN286 — это 4х-осевой ПЛК, разработанный компанией UniMAT.
  • Встроены 24DI/16DO
  • Коммуникационные порты: два RS485, поддержка PPI Master.
  • Модули расширения Макс. разрешено: 7 модулей ввода/вывода
  • Поддерживает 256 цифровых и 64 аналоговых
  • Больше пользовательского хранилища: хранилище программ: 24 КБ, хранилище пользовательских данных: 10 КБ
  • Встроенная простая и гибкая подфункция PID, позволяющая пользователям более удобно реализовывать многоканальное PID-управление.
  • Применение долговременного хранения данных во флэш-памяти при отключении питания, отсутствие необходимости в источнике питания, может сохранять данные в течение 10 лет.
  • Уникальный альтернативный алгоритм шифрования AES, защищающий интеллектуальную собственность клиентов.
ПЛК UN200 обладает не только стабильными, надежными функциями, но также имеет функции управления движением: 4х-осевой высокоскоростной импульсный выход 200 кГц, однофазный высокоскоростной счетчик 200 КГц, простую в использовании библиотеку управления движением, поддержку управления точка-точка, управление скоростью, линейную и круговую интерполяцию.
Модель CPU Описание
UN2141BD230XB8 UN 214-1BD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224, ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ АС, 14DI =24В, 10DO С ЗАМЫК. КОНТАКТАМИ РЕЛЕ
UN2141AD230XB8 UN 214-1AD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224, ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC, 14DI =24В, 10DO =24В
UN2142AD230XB0 UN 214-2AD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224XP ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC/DC/DC 14DI , 10DO
UN2142BD230XB0 UN 214-2BD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224XP ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ AC/DC/RLY, 14DI , 10DO
UN2843AD230XB0 UN 284-3AD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU284, ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC/DC/DC, 3RS485, 14DI, 10DO
UN2843BD230XB0 UN 284-3BD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU284, ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ AC/DC, Relay 3RS485, 14DI, 10DO
UN2162AD230XB8 UN 216-2AD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU226 ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC/DC/DC, 24DI , 16DO
UN2162BD230XB8 UN 216-2BD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU226 ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ AC/DC/Relay, 24DI , 16DO
UN2862AM230XB0 UN 286-2AM23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU286 ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ CPU286 ФУНКЦИЯ УПРАВЛЕНИЯ ДВИЖЕНИЕМ DC/DC/DC 4 AIX motion control, 24DI , 16DO
Модули ввода -вывода
UN2211BF220XA0 UN 221-1BF22-0XA0 МОДУЛЬ ВВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM221 8DI,DC 24V
UN2211BH220XA0 UN 221-1BH22-0XA0 МОДУЛЬ ВВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM221 16DI, DC 24V
UN2211BL220XA0 UN 221-1BL22-0XA0 МОДУЛЬ ВВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM221 32DI, DC 24V
UN2221BF220XA0 UN 222-1BF22-0XA0 МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM222 8DO, DC 24V
UN2221HF220XA0 UN 222-1HF22-0XA0 МОДУЛЬ ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM222 8DO, Relay
UN2601AA000XA0 UN 260-1AA00-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ IM260 PROFIBUS DP interface module
UN2221BH220XA0 UN 222-1BH22-0XA0 МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM222 16DO, DC 24V
UN2221HH220XA0 UN 222-1HH22-0XA0 МОДУЛЬ ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM222 16DO, Relay
UN2221BL220XA0 UN 222-1BL22-0XA0 МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM222 32DO, DC 24V
UN2231BF220XA0 UN 223-1BF22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM223 4DI/4DO, DC 24V
UN2231HF220XA0 UN 223-1HF22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM223 4DI/4DO, DC 24V/Relay
UN2231BH220XA0 UN 223-1BH22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM223 8DI/8DO, DC 24V
UN2231PH220XA0 UN 223-1PH22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM223 8DI/8DO,DC 24V/Relay
UN2231BL220XA0 UN 223-1BL22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM223 16DI/16DO, DC 24V
UN2231PL220XA0 UN 223-1PL22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM223 16DI/16DO, 24VDC/Relay
UN2310HC220XA0 UN 231-0HC22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 4AI,12 bits
UN2310HF220XA0 UN 231-0HF22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 8AI,14 bits, AIW region
UN2317PB220XA0 UN 231-7PB22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 2RTD
UN2317PD220XA0 UN 231-7PD22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 4TC
UN2320HB220XA0 UN 232-0HB22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВЫВОДА EM232 2AO
UN2320HD220XA0 UN 232-0HD22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВЫВОДА EM232 4AO
UN2350KD220XA0 UN 235-0KD22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА-ВЫВОДА EM235 4AI/1AO
UN2310HH320XA0 UN 231-0HH32-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 8AI,14 bits, VW region
UN2317PC220XA0 UN 231-7PC22-0XA0 МОДУЛЬ ТЕРМОСОПРОТИВЛЕНИЙ EM231 4RTD
UN2317PF220XA0 UN 231-7PF22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 8TC AIW region
UN2317PH220XA0 UN 231-7PH22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 8TC VW region
UN2317PL220XA0 UN 231-7PL22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 16TC
UN2317WC220XA0 UN 231-7WC22-0XA0 МОДУЛЬ ВЕСОВОГО ИЗМЕРЕНИЯ EM231 4AI weighing Module
Коммуникационные модули
UN2670AA000XA0 UN 267-0AA00-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ IM267 Profinet slave module
UN2770AA220XA0 UN 277-0AA22-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ EM277 PROFIBUS DP communication module
UN2610AA220XA0 UN 261-0AA22-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ IM261 MODBUS RTU SLAVE MODULE
Аксессуары
UN9013EB100XA0 UN 901-3EB10-0XA0 КОНВЕКТОР Ethernet to PPI converter
UN9013CB300XA0 UN 901-3CB30-0XA0 АДАПТЕР RS232 serialport PPI adapter
UN9013DB300XA0 UN 901-3DB30-0XA0 АДАПТЕР USB PPI adapter
UN2071CB200AA0 UN 207-1CB20-0AA0 МОДУЛЬ ПИТАНИЯ UN 207 24V DC/2.5A Power supply
UN2906AA200XA0 UN 290-6AA20-0XA0 АДАПТЕР UN200 Bus cable
Модель CPU
Описание
UN2141BD230XB8
UN 214-1BD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224, ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ АС, 14DI =24В, 10DO С ЗАМЫК. КОНТАКТАМИ РЕЛЕ
UN2141AD230XB8
UN 214-1AD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224, ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC, 14DI =24В, 10DO =24В
UN2142AD230XB0
UN 214-2AD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224XP ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC/DC/DC 14DI , 10DO
UN2142BD230XB0
UN 214-2BD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU 224XP ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ AC/DC/RLY, 14DI , 10DO
UN2843AD230XB0
UN 284-3AD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU284, ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC/DC/DC, 3RS485, 14DI, 10DO
UN2843BD230XB0
UN 284-3BD23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU284, ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ AC/DC, Relay 3RS485, 14DI, 10DO
UN2162AD230XB8
UN 216-2AD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU226 ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ DC/DC/DC, 24DI , 16DO
UN2162BD230XB8
UN 216-2BD23-0XB8 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU226 ПИТАНИЕ ПЕРЕМЕННЫМ ТОКОМ AC/DC/Relay, 24DI , 16DO
UN2862AM230XB0
UN 286-2AM23-0XB0 ЦЕНТРАЛЬНЫЙ ПРОЦЕССОР CPU286 ПИТАНИЕ ПОСТОЯННЫМ ТОКОМ CPU286 ФУНКЦИЯ УПРАВЛЕНИЯ ДВИЖЕНИЕМ DC/DC/DC 4 AIX motion control, 24DI , 16DO
Модули ввода -вывода
UN2211BF220XA0
UN 221-1BF22-0XA0 МОДУЛЬ ВВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM221 8DI,DC 24V
UN2211BH220XA0
UN 221-1BH22-0XA0 МОДУЛЬ ВВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM221 16DI, DC 24V
UN2211BL220XA0
UN 221-1BL22-0XA0 МОДУЛЬ ВВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM221 32DI, DC 24V
UN2221BF220XA0
UN 222-1BF22-0XA0 МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM222 8DO, DC 24V
UN2221HF220XA0
UN 222-1HF22-0XA0 МОДУЛЬ ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM222 8DO, Relay
UN2601AA000XA0
UN 260-1AA00-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ IM260 PROFIBUS DP interface module
UN2221BH220XA0
UN 222-1BH22-0XA0 МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM222 16DO, DC 24V
UN2221HH220XA0
UN 222-1HH22-0XA0 МОДУЛЬ ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM222 16DO, Relay
UN2221BL220XA0
UN 222-1BL22-0XA0 МОДУЛЬ ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM222 32DO, DC 24V
UN2231BF220XA0
UN 223-1BF22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM223 4DI/4DO, DC 24V
UN2231HF220XA0
UN 223-1HF22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM223 4DI/4DO, DC 24V/Relay
UN2231BH220XA0
UN 223-1BH22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM223 8DI/8DO, DC 24V
UN2231PH220XA0
UN 223-1PH22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM223 8DI/8DO,DC 24V/Relay
UN2231BL220XA0
UN 223-1BL22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА ДИСКРЕТНЫХ СИГНАЛОВ EM223 16DI/16DO, DC 24V
UN2231PL220XA0
UN 223-1PL22-0XA0 МОДУЛЬ ВВОДА-ВЫВОДА РЕЛЕЙНЫХ СИГНАЛОВ EM223 16DI/16DO, 24VDC/Relay
UN2310HC220XA0
UN 231-0HC22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 4AI,12 bits
UN2310HF220XA0
UN 231-0HF22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 8AI,14 bits, AIW region
UN2317PB220XA0
UN 231-7PB22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 2RTD
UN2317PD220XA0
UN 231-7PD22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 4TC
UN2320HB220XA0
UN 232-0HB22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВЫВОДА EM232 2AO
UN2320HD220XA0
UN 232-0HD22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВЫВОДА EM232 4AO
UN2350KD220XA0
UN 235-0KD22-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА-ВЫВОДА EM235 4AI/1AO
UN2310HH320XA0
UN 231-0HH32-0XA0 МОДУЛЬ АНАЛОГОВОГО ВВОДА EM231 8AI,14 bits, VW region
UN2317PC220XA0
UN 231-7PC22-0XA0 МОДУЛЬ ТЕРМОСОПРОТИВЛЕНИЙ EM231 4RTD
UN2317PF220XA0
UN 231-7PF22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 8TC AIW region
UN2317PH220XA0
UN 231-7PH22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 8TC VW region
UN2317PL220XA0
UN 231-7PL22-0XA0 МОДУЛЬ ТЕРМОПАР EM231 16TC
UN2317WC220XA0
UN 231-7WC22-0XA0 МОДУЛЬ ВЕСОВОГО ИЗМЕРЕНИЯ EM231 4AI weighing Module
Коммуникационные модули
UN2670AA000XA0
UN 267-0AA00-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ IM267 Profinet slave module
UN2770AA220XA0
UN 277-0AA22-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ EM277 PROFIBUS DP communication module
UN2610AA220XA0
UN 261-0AA22-0XA0 МОДУЛЬ ИНТЕРФЕЙСНЫЙ IM261 MODBUS RTU SLAVE MODULE
Аксессуары
UN9013EB100XA0
UN 901-3EB10-0XA0 КОНВЕКТОР Ethernet to PPI converter
UN9013CB300XA0
UN 901-3CB30-0XA0 АДАПТЕР RS232 serialport PPI adapter
UN9013DB300XA0
UN 901-3DB30-0XA0 АДАПТЕР USB PPI adapter
UN2071CB200AA0
UN 207-1CB20-0AA0 МОДУЛЬ ПИТАНИЯ UN 207 24V DC/2.5A Power supply
UN2906AA200XA0
UN 290-6AA20-0XA0 АДАПТЕР UN200 Bus cable

Технические характеристики СPU:

.............................Структура СPU 224...................................................................Структура CPU226
Model CPU 224-2Q  CPU 224-2R  CPU 226-2Q  CPU 226-2R  CPU 224XP -2Q CPU224XP-2R
Power consume 7W 10W 11W 17W 7W 17W
Memory
Program  memory 20K 24K 20K
Data Memory 10K( can hold data for 10 years on power down) 20K
I/O Characteristics 14DI 24DI 14DI
Digital input Digital output 10DO 16DO 10DO
Digital I/O Image size 256 ( 128DI/128DO)
Analog I/O Image size 64 (32AI/32AO)
I/O Characteristics
Max.expansio modules allowed 7
Pulse catch input 14 24 14
Total number of high-speed counter 6
Single phase counter 6, each 30KHz 6,30K(4),200K(2),I0.3~I0.5are200KH
I0.0~I0.2 and I0.6~I1.5 are 30KHz
Two phase counter 4, each 20KHz 4,20K(3),100K(1)
Pulse outputs Characteristic two 30KHz ( only DC output) - two 30KHz ( only DC output) - two 30KHz ( only DC output) -
Characteristic
Timers 256 total timers 4timers 1ms, 16 timers 10ms, 236 timers 100ms
Counters 256(backed by super capacitor or battery)
Internal memory bits stored on power down 256
Timed interrupts Two with 1ms resolution
Edge interrupts 4 up /4 down
Reatime clock Built-in
Analog adjustment 2 with  8 bit resolution
Inte gration Communication function
Communication port 2 RS485 standard PPI communication ports
PPI baud rate(kbps)  9.6k, 19.2k, 187.5kbps
Freeport baud rates 1.2k-115.2kbaud
Max.cable length per segment Using isolated potentiometer, 187.5kbps can be 1000 meters,38.4kbps can be 1200 meters
 Non-using isolated potentiometer, then 50meters
Max.number of masters 32
Max.number of stations 32 per segment, 126 per network
Peer to Peer ( PPI Master mode) Yes
Power   Characteristics
Input voltage 20.4-28.8 VDC 85-264V AC (47-63Hz) 20.4-28.8 VDC 85-264V AC (47-63Hz) 20.4-28.8 VDC 85-264V AC (47-63Hz)
Input Current 110mA (only CUP, 24V DC) 60/30mA (only CPU, 120/240V AC) 110mA (only CPU, 24V DC) 60/30mA (only CPU, 120/240V AC) 110mA (only CPU, 24V DC) 60/30mA (only CPU, 120/240V AC)
Input Current 700mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC) 1050mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC) 700mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC)
Surge current 12A at 28.8 V DC 20A at 264V AC 12A at 28.8 V DC 20A at 264V AC 12A at 28.8 V DC 20A at 264V AC
Isolation (field to logic) Not isolated 1500V AC Not isolated 1500V AC Not isolated 1500V AC
Sensor voltage L+ minus 5V 20.4-28.8V DC L+ minus 5V 20.4-28.8V DC L+ minus 5V 20.4-28.8V DC
Current limit 1.5 A Peak
Ripple Noise From input power supply Less than 1V peak-to-peak From input power supply Less than 1V peak-to-peak From input power supply Less than 1V peak-to-peak
Isolation (sensor and logic) No isolation
Digital input characteristics
Integration Digital Inputs 14 24 14
Input type PNP/NPN
Rated voltage 24 VDC 4mA
Max. Continuous permissible voltage 30 VDC
Surge voltage 35 VDC 0.5s
Logic “1”voltage range 15 V~30V DC 15VDC 2.5mA(I0.0~I0.2 and I0.6~I1.5)
4VDC 8mA(I0.3~I0.5)
Logic “0”voltage range 0~5V DC 5VDC 1mA(I0.0~I0.2 and I0.6~I1.5)
1VDC 1mA(I0.3~I0.5)
Input delay Optional (0.2-12.8ms)
Connection of 2-wire proximity switch sensor (Bero) Permissible leakage current (Max.) 1mA
Isolation
Isolation field to Logic Yes
Optical(gawanic) 500 V AC for 1 minute
Groups see wiring diagram
High- speed Counter input rate Logic1 = 15-30V DC 20KHz(single phase), 10KHz ( two phase)
High- speed Counter input rate Logic 1 = 15-26V DC 30KHz(singlephase), 20KHz ( twophase)
Inputs on simultan- eously all
Cable length ( Max.) 500meters ( standard input)
Shielded 50 meters (High speed counter input)
Unshielded 300 meters ( standard input)
Digital output standard
Integration digital outputs 10 16 10
Type Solid state - MOSFET (PNP) Dry contact Solid state - MOSFET (PNP) Dry contact Solid state - MOSFET (PNP) Dry contact
Rated voltage 24V DC 24V DC or 250V AC 24V DC 24V DC or 250V AC 24 V DC 24 V DC or 250 V AC
Voltage range 20.4-28.8 V DC 5-30V DC / 5-250V AC 20.4-28.8 V DC 5-30V DC / 5-250V AC 5-28.8 V DC(Q0.0-Q0.4)
20.4-28.8VDC(Q0.5-Q1.1)
5-30V DC,5-250V AC
Surge current (Max.) 8 A,100ms 5 A ,4s at 10% work ratio 8 A,100ms 5 A ,4s at 10% work ratio 8 A,100ms 5 A ,4s at 10% work ratio
Logic 1 (Min.) 20V DC (Max.Current) - 20V DC (Max.Current) - L+ minus 0.4V (Max.Current) -
Logic 0 (Max.) 0.1V DC 10KΩload - 0.1V DC 10KΩload - 0.1V DC10KΩload -
Rated current per point (Max.) 0.75A 2A 0.75A 2A 0.75A 2A
Rated current per common (Max.) 6A 10A 6A 10A 6A 10A
Leakage current (Max.) 10µA - 10µA - 10µA -
Lamp load (Max.) 5W 30W DC, 200W AC 5W 30W DC,200W AC 5W 30W DC,200W AC
Inductive clamp voltage L+minus 48 VDC, 1W power dissipation - L+minus 48 VDC, 1W power dissipation - L+minus 48 VDC, 1W power dissipation -
On state resistance (contact) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new)
Isolation
Optical galvanic (field to logic) 500V AC for 1min. - 500V AC for 1min. - 500V AC for 1min.
Logic to contact - 500VAC for 1min. - 500V AC for 1min. - 500V AC for 1min.
Isolation
Resistance (logic to contact) - 100mΩ - 100mΩ - 100mΩ
Isolation groups See wiring diagram
Off to on 2µs (Q0.0, Q0.1), 15µs (other) - 2µs (Q0.0, Q0.1), 15µs (other) - 2µs (Q0.0, Q0.1), 15µs (other)  
On to off 10µs (Q0.0, Q0.1), 130µs (other) - 10µs (Q0.0, Q0.1), 130µs (other) - 10µs (Q0.0, Q0.1), 130µs (other) -
Switching - 10ms - 10ms - 10ms
Pulse frequency (Max.) 20kHz (Q0.0 and Q0.1) 1Hz 20kHz  (Q0.0 and Q0.1) 1Hz 100kHz (Q0.0 and Q0.1) 1Hz
Mechanical life cycle - 10,000,000 (non load) - 10,000,000 (non load) - 10,000,000 (non load)
Contact lifetime - 100 (Rated load) - 100 (Rated load) - 100 (Rated load)
Outputs of simulta- neously connect All output at 60℃ (Horizontal)
All output at 50℃ ( Vertical)
Connecting two outputs in parallel Yes, only outputs in same group no Yes, only outputs in same group no Yes, only outputs in same group no
Shielded 500m
Unshielded 150m
Analog input characteristics
Integrated analog input points - - 2 inputs
Analog input bytes  - - single-ended
Voltage         range   - - ±10V
Data word fomat,full-scale - - -32000~+32000
DC input - - >100KΩ
Max input voltage - - 30VDC
Resolution - - 11 bits
LSB value  - - 4.88mV
Isolation - - None
Accuracy  - - ±2.5%full-scale (worst loditions 0-55degree)
±1.0%full-scale (typical 25degree)
Repeatity - - ±0.05%full-scale
Analog to digital conversion time - - 125ms
Change bit - - SAR
Step response - - max 250ms
 Noise restrain - - typical-40dB@50Hz
Analog output characteristics
Integrated AO   - - 1 output
Signal range - - voltage 0-10V, current 0-20mA
Data word fomat, full-scale - - 0~32000
Vesolution  - - 12bits
LSB value - - voltage 0-10V, current 0-20mA
 Isolation - - None
Accuracy - - worst condition
voltage output ±2% full scale, current output ±3% full scale
typical  condition
voltage output ±1% full scale, current output ±1% full scale
Build time  - - voltage output 50us, current output 100us
Max output drive - - voltage output min≥ 5000Ω, current output max≤500Ω
Environment parameter
Working    temperature 0℃~60℃ (horizontal    installation), 0℃~40℃ (vertical installation)
Transportation temperature -20℃~80℃
Relative humidity 5~95%,no   condensation (RHgrade,comform to the IEC61131-2)
Electromagnetic compatibility meet EMC requirement noise rejected, meet the IEC61000-6-2 test meet the IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,
 IEC61000-4-6
             
Mechanical grade IEC60068, Part2-6/10up58Hz constant amplitude0.075mm; 58~150Hz; constant acceleration1g; vibration period:every axis has 10pcs vibration period on each direction of three mutually vertical axis
IP grade IP20
 Order number UN214-1AD23-0XB0 UN214-1BD23-0XB0 UN216-2AD23-0XB0 UN216-2BD23-0XB0 UN214-2AD23-0XB0 UN214-2BD23-0XB0
Model
CPU 224-2Q
 CPU 224-2R
CPU 226-2Q
 CPU 226-2R
CPU 224XP -2Q
CPU224XP-2R
Power consume
7W
10W
11W
17W
7W
17W
Memory
Program  memory
20K
24K
20K
Data Memory
10K( can hold data for 10 years on power down)
20K
I/O Characteristics
14DI
24DI
14DI
Digital input Digital output
10DO
16DO
10DO
Digital I/O Image size
256 ( 128DI/128DO)
Analog I/O Image size
64 (32AI/32AO)
I/O Characteristics
Max.expansio modules allowed
7
Pulse catch input
14
24
14
Total number of high-speed counter
6
Single phase counter
6, each 30KHz
6,30K(4),200K(2),I0.3~I0.5are200KH
I0.0~I0.2 and I0.6~I1.5 are 30KHz
Two phase counter
4, each 20KHz
4,20K(3),100K(1)
Pulse outputs Characteristic
two 30KHz ( only DC output)
-
two 30KHz ( only DC output)
-
two 30KHz ( only DC output)
-
Characteristic
Timers
256 total timers 4timers 1ms, 16 timers 10ms, 236 timers 100ms
Counters
256(backed by super capacitor or battery)
Internal memory bits stored on power down
256
Timed interrupts
Two with 1ms resolution
Edge interrupts
4 up /4 down
Reatime clock
Built-in
Analog adjustment
2 with  8 bit resolution
Inte gration Communication function
Communication port
2 RS485 standard PPI communication ports
PPI baud rate(kbps)
9.6k, 19.2k, 187.5kbps
Freeport baud rates
1.2k-115.2kbaud
Max.cable length per segment
Using isolated potentiometer, 187.5kbps can be 1000 meters,38.4kbps can be 1200 meters
 Non-using isolated potentiometer, then 50meters
Max.number of masters
32
Max.number of stations
32 per segment, 126 per network
Peer to Peer ( PPI Master mode)
Yes
Power   Characteristics
Input voltage
20.4-28.8 VDC
85-264V AC (47-63Hz)
20.4-28.8 VDC
85-264V AC (47-63Hz)
20.4-28.8 VDC
85-264V AC (47-63Hz)
Input Current
110mA (only CUP, 24V DC)
60/30mA (only CPU, 120/240V AC)
110mA (only CPU, 24V DC)
60/30mA (only CPU, 120/240V AC)
110mA (only CPU, 24V DC)
60/30mA (only CPU, 120/240V AC)
Input Current
700mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
1050mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
700mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
Surge current
12A at 28.8 V DC
20A at 264V AC
12A at 28.8 V DC
20A at 264V AC
12A at 28.8 V DC
20A at 264V AC
Isolation (field to logic)
Not isolated
1500V AC
Not isolated
1500V AC
Not isolated
1500V AC
Sensor voltage
L+ minus 5V
20.4-28.8V DC
L+ minus 5V
20.4-28.8V DC
L+ minus 5V
20.4-28.8V DC
Current limit
1.5 A Peak
Ripple Noise
From input power supply
Less than 1V peak-to-peak
From input power supply
Less than 1V peak-to-peak
From input power supply
Less than 1V peak-to-peak
Isolation (sensor and logic)
No isolation
Digital input characteristics
Integration Digital Inputs
14
24
14
Input type
PNP/NPN
Rated voltage
24 VDC 4mA
Max. Continuous permissible voltage
30 VDC
Surge voltage
35 VDC 0.5s
Logic “1”voltage range
15 V~30V DC
15VDC 2.5mA(I0.0~I0.2 and I0.6~I1.5)
4VDC 8mA(I0.3~I0.5)
Logic “0”voltage range
0~5V DC
5VDC 1mA(I0.0~I0.2 and I0.6~I1.5)
1VDC 1mA(I0.3~I0.5)
Input delay
Optional (0.2-12.8ms)
Connection of 2-wire proximity switch sensor (Bero) Permissible leakage current (Max.)
1mA
Isolation
Isolation field to Logic
Yes
Optical(gawanic)
500 V AC for 1 minute
Groups
see wiring diagram
High- speed Counter input rate Logic1 = 15-30V DC
20KHz(single phase), 10KHz ( two phase)
High- speed Counter input rate Logic 1 = 15-26V DC
30KHz(singlephase), 20KHz ( twophase)
Inputs on simultan- eously
all
Cable length ( Max.)
500meters ( standard input)
Shielded
50 meters (High speed counter input)
Unshielded
300 meters ( standard input)
Digital output standard
Integration digital outputs
10
16
10
Type
Solid state - MOSFET (PNP)
Dry contact
Solid state - MOSFET (PNP)
Dry contact
Solid state - MOSFET (PNP)
Dry contact
Rated voltage
24V DC
24V DC or 250V AC
24V DC
24V DC or 250V AC
24 V DC
24 V DC or 250 V AC
Voltage range
20.4-28.8 V DC
5-30V DC / 5-250V AC
20.4-28.8 V DC
5-30V DC / 5-250V AC
5-28.8 V DC(Q0.0-Q0.4)
20.4-28.8VDC(Q0.5-Q1.1)
5-30V DC,5-250V AC
Surge current (Max.)
8 A,100ms
5 A ,4s at 10% work ratio
8 A,100ms
5 A ,4s at 10% work ratio
8 A,100ms
5 A ,4s at 10% work ratio
Logic 1 (Min.)
20V DC (Max.Current)
-
20V DC (Max.Current)
-
L+ minus 0.4V (Max.Current)
-
Logic 0 (Max.)
0.1V DC 10KΩload
-
0.1V DC 10KΩload
-
0.1V DC10KΩload
-
Rated current per point (Max.)
0.75A
2A
0.75A
2A
0.75A
2A
Rated current per common (Max.)
6A
10A
6A
10A
6A
10A
Leakage current (Max.)
10µA
-
10µA
-
10µA
-
Lamp load (Max.)
5W
30W DC, 200W AC
5W
30W DC,200W AC
5W
30W DC,200W AC
Inductive clamp voltage
L+minus 48 VDC, 1W power dissipation
-
L+minus 48 VDC, 1W power dissipation
-
L+minus 48 VDC, 1W power dissipation
-
On state resistance (contact)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
Isolation
Optical galvanic (field to logic)
500V AC for 1min.
-
500V AC for 1min.
-
500V AC for 1min.
Logic to contact
-
500VAC for 1min.
-
500V AC for 1min.
-
500V AC for 1min.
Isolation
Resistance (logic to contact)
-
100mΩ
-
100mΩ
-
100mΩ
Isolation groups
See wiring diagram
Off to on
2µs (Q0.0, Q0.1), 15µs (other)
-
2µs (Q0.0, Q0.1), 15µs (other)
-
2µs (Q0.0, Q0.1), 15µs (other)

On to off
10µs (Q0.0, Q0.1), 130µs (other)
-
10µs (Q0.0, Q0.1), 130µs (other)
-
10µs (Q0.0, Q0.1), 130µs (other)
-
Switching
-
10ms
-
10ms
-
10ms
Pulse frequency (Max.)
20kHz (Q0.0 and Q0.1)
1Hz
20kHz  (Q0.0 and Q0.1)
1Hz
100kHz (Q0.0 and Q0.1)
1Hz
Mechanical life cycle
-
10,000,000 (non load)
-
10,000,000 (non load)
-
10,000,000 (non load)
Contact lifetime
-
100 (Rated load)
-
100 (Rated load)
-
100 (Rated load)
Outputs of simulta- neously connect
All output at 60℃ (Horizontal)
All output at 50℃ ( Vertical)
Connecting two outputs in parallel
Yes, only outputs in same group
no
Yes, only outputs in same group
no
Yes, only outputs in same group
no
Shielded
500m
Unshielded
150m
Analog input characteristics
Integrated analog input points
-
-
2 inputs
Analog input bytes
-
-
single-ended
Voltage         range 
-
-
±10V
Data word fomat,full-scale
-
-
-32000~+32000
DC input
-
-
>100KΩ
Max input voltage
-
-
30VDC
Resolution
-
-
11 bits
LSB value
-
-
4.88mV
Isolation
-
-
None
Accuracy
-
-
±2.5%full-scale (worst loditions 0-55degree)
±1.0%full-scale (typical 25degree)
Repeatity
-
-
±0.05%full-scale
Analog to digital conversion time
-
-
125ms
Change bit
-
-
SAR
Step response
-
-
max 250ms
 Noise restrain
-
-
typical-40dB@50Hz
Analog output characteristics
Integrated AO 
-
-
1 output
Signal range
-
-
voltage 0-10V, current 0-20mA
Data word fomat, full-scale
-
-
0~32000
Vesolution
-
-
12bits
LSB value
-
-
voltage 0-10V, current 0-20mA
 Isolation
-
-
None
Accuracy
-
-
worst condition
voltage output ±2% full scale, current output ±3% full scale
typical  condition
voltage output ±1% full scale, current output ±1% full scale
Build time
-
-
voltage output 50us, current output 100us
Max output drive
-
-
voltage output min≥ 5000Ω, current output max≤500Ω
Environment parameter
Working    temperature
0℃~60℃ (horizontal    installation), 0℃~40℃ (vertical installation)
Transportation temperature
-20℃~80℃
Relative humidity
5~95%,no   condensation (RHgrade,comform to the IEC61131-2)
Electromagnetic compatibility
meet EMC requirement noise rejected, meet the IEC61000-6-2 test meet the IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,
 IEC61000-4-6
Mechanical grade
IEC60068, Part2-6/10up58Hz constant amplitude0.075mm; 58~150Hz; constant acceleration1g; vibration period:every axis has 10pcs vibration period on each direction of three mutually vertical axis
IP grade
IP20
 Order number
UN214-1AD23-0XB0
UN214-1BD23-0XB0
UN216-2AD23-0XB0
UN216-2BD23-0XB0
UN214-2AD23-0XB0
UN214-2BD23-0XB0
Схема подключения

CPU 224 DC/DC/DC

CPU 224 AC/DC/RLY

CPU 226 DC/DC/DC

CPU 226 AC/DC/RLY

Model CPU 224-2Q  CPU 224-2R  CPU 226-2Q  CPU 226-2R  CPU 224XP -2Q CPU224XP-2R
Power consume 7W 10W 11W 17W 7W 17W
Memory
Program  memory 20K 24K 20K
Data Memory 10K( can hold data for 10 years on power down) 20K
I/O Characteristics 14DI 24DI 14DI
Digital input Digital output 10DO 16DO 10DO
Digital I/O Image size 256 ( 128DI/128DO)
Analog I/O Image size 64 (32AI/32AO)
I/O Characteristics
Max.expansio modules allowed 7
Pulse catch input 14 24 14
Total number of high-speed counter 6
Single phase counter 6, each 30KHz 6,30K(4),200K(2),I0.3~I0.5are200KH
I0.0~I0.2 and I0.6~I1.5 are 30KHz
Two phase counter 4, each 20KHz 4,20K(3),100K(1)
Pulse outputs Characteristic two 30KHz ( only DC output) - two 30KHz ( only DC output) - two 30KHz ( only DC output) -
Characteristic
Timers 256 total timers 4timers 1ms, 16 timers 10ms, 236 timers 100ms
Counters 256(backed by super capacitor or battery)
Internal memory bits stored on power down 256
Timed interrupts Two with 1ms resolution
Edge interrupts 4 up /4 down
Reatime clock Built-in
Analog adjustment 2 with  8 bit resolution
Inte gration Communication function
Communication port 2 RS485 standard PPI communication ports
PPI baud rate(kbps)  9.6k, 19.2k, 187.5kbps
Freeport baud rates 1.2k-115.2kbaud
Max.cable length per segment Using isolated potentiometer, 187.5kbps can be 1000 meters,38.4kbps can be 1200 meters
 Non-using isolated potentiometer, then 50meters
Max.number of masters 32
Max.number of stations 32 per segment, 126 per network
Peer to Peer ( PPI Master mode) Yes
Power   Characteristics
Input voltage 20.4-28.8 VDC 85-264V AC (47-63Hz) 20.4-28.8 VDC 85-264V AC (47-63Hz) 20.4-28.8 VDC 85-264V AC (47-63Hz)
Input Current 110mA (only CUP, 24V DC) 60/30mA (only CPU, 120/240V AC) 110mA (only CPU, 24V DC) 60/30mA (only CPU, 120/240V AC) 110mA (only CPU, 24V DC) 60/30mA (only CPU, 120/240V AC)
Input Current 700mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC) 1050mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC) 700mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC)
Surge current 12A at 28.8 V DC 20A at 264V AC 12A at 28.8 V DC 20A at 264V AC 12A at 28.8 V DC 20A at 264V AC
Isolation (field to logic) Not isolated 1500V AC Not isolated 1500V AC Not isolated 1500V AC
Sensor voltage L+ minus 5V 20.4-28.8V DC L+ minus 5V 20.4-28.8V DC L+ minus 5V 20.4-28.8V DC
Current limit 1.5 A Peak
Ripple Noise From input power supply Less than 1V peak-to-peak From input power supply Less than 1V peak-to-peak From input power supply Less than 1V peak-to-peak
Isolation (sensor and logic) No isolation
Digital input characteristics
Integration Digital Inputs 14 24 14
Input type PNP/NPN
Rated voltage 24 VDC 4mA
Max. Continuous permissible voltage 30 VDC
Surge voltage 35 VDC 0.5s
Logic “1”voltage range 15 V~30V DC 15VDC 2.5mA(I0.0~I0.2 and I0.6~I1.5)
4VDC 8mA(I0.3~I0.5)
Logic “0”voltage range 0~5V DC 5VDC 1mA(I0.0~I0.2 and I0.6~I1.5)
1VDC 1mA(I0.3~I0.5)
Input delay Optional (0.2-12.8ms)
Connection of 2-wire proximity switch sensor (Bero) Permissible leakage current (Max.) 1mA
Isolation
Isolation field to Logic Yes
Optical(gawanic) 500 V AC for 1 minute
Groups see wiring diagram
High- speed Counter input rate Logic1 = 15-30V DC 20KHz(single phase), 10KHz ( two phase)
High- speed Counter input rate Logic 1 = 15-26V DC 30KHz(singlephase), 20KHz ( twophase)
Inputs on simultan- eously all
Cable length ( Max.) 500meters ( standard input)
Shielded 50 meters (High speed counter input)
Unshielded 300 meters ( standard input)
Digital output standard
Integration digital outputs 10 16 10
Type Solid state - MOSFET (PNP) Dry contact Solid state - MOSFET (PNP) Dry contact Solid state - MOSFET (PNP) Dry contact
Rated voltage 24V DC 24V DC or 250V AC 24V DC 24V DC or 250V AC 24 V DC 24 V DC or 250 V AC
Voltage range 20.4-28.8 V DC 5-30V DC / 5-250V AC 20.4-28.8 V DC 5-30V DC / 5-250V AC 5-28.8 V DC(Q0.0-Q0.4)
20.4-28.8VDC(Q0.5-Q1.1)
5-30V DC,5-250V AC
Surge current (Max.) 8 A,100ms 5 A ,4s at 10% work ratio 8 A,100ms 5 A ,4s at 10% work ratio 8 A,100ms 5 A ,4s at 10% work ratio
Logic 1 (Min.) 20V DC (Max.Current) - 20V DC (Max.Current) - L+ minus 0.4V (Max.Current) -
Logic 0 (Max.) 0.1V DC 10KΩload - 0.1V DC 10KΩload - 0.1V DC10KΩload -
Rated current per point (Max.) 0.75A 2A 0.75A 2A 0.75A 2A
Rated current per common (Max.) 6A 10A 6A 10A 6A 10A
Leakage current (Max.) 10µA - 10µA - 10µA -
Lamp load (Max.) 5W 30W DC, 200W AC 5W 30W DC,200W AC 5W 30W DC,200W AC
Inductive clamp voltage L+minus 48 VDC, 1W power dissipation - L+minus 48 VDC, 1W power dissipation - L+minus 48 VDC, 1W power dissipation -
On state resistance (contact) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new)
Isolation
Optical galvanic (field to logic) 500V AC for 1min. - 500V AC for 1min. - 500V AC for 1min.
Logic to contact - 500VAC for 1min. - 500V AC for 1min. - 500V AC for 1min.
Isolation
Resistance (logic to contact) - 100mΩ - 100mΩ - 100mΩ
Isolation groups See wiring diagram
Off to on 2µs (Q0.0, Q0.1), 15µs (other) - 2µs (Q0.0, Q0.1), 15µs (other) - 2µs (Q0.0, Q0.1), 15µs (other)  
On to off 10µs (Q0.0, Q0.1), 130µs (other) - 10µs (Q0.0, Q0.1), 130µs (other) - 10µs (Q0.0, Q0.1), 130µs (other) -
Switching - 10ms - 10ms - 10ms
Pulse frequency (Max.) 20kHz (Q0.0 and Q0.1) 1Hz 20kHz  (Q0.0 and Q0.1) 1Hz 100kHz (Q0.0 and Q0.1) 1Hz
Mechanical life cycle - 10,000,000 (non load) - 10,000,000 (non load) - 10,000,000 (non load)
Contact lifetime - 100 (Rated load) - 100 (Rated load) - 100 (Rated load)
Outputs of simulta- neously connect All output at 60℃ (Horizontal)
All output at 50℃ ( Vertical)
Connecting two outputs in parallel Yes, only outputs in same group no Yes, only outputs in same group no Yes, only outputs in same group no
Shielded 500m
Unshielded 150m
Analog input characteristics
Integrated analog input points - - 2 inputs
Analog input bytes  - - single-ended
Voltage         range   - - ±10V
Data word fomat,full-scale - - -32000~+32000
DC input - - >100KΩ
Max input voltage - - 30VDC
Resolution - - 11 bits
LSB value  - - 4.88mV
Isolation - - None
Accuracy  - - ±2.5%full-scale (worst loditions 0-55degree)
±1.0%full-scale (typical 25degree)
Repeatity - - ±0.05%full-scale
Analog to digital conversion time - - 125ms
Change bit - - SAR
Step response - - max 250ms
 Noise restrain - - typical-40dB@50Hz
Analog output characteristics
Integrated AO   - - 1 output
Signal range - - voltage 0-10V, current 0-20mA
Data word fomat, full-scale - - 0~32000
Vesolution  - - 12bits
LSB value - - voltage 0-10V, current 0-20mA
 Isolation - - None
Accuracy - - worst condition
voltage output ±2% full scale, current output ±3% full scale
typical  condition
voltage output ±1% full scale, current output ±1% full scale
Build time  - - voltage output 50us, current output 100us
Max output drive - - voltage output min≥ 5000Ω, current output max≤500Ω
Environment parameter
Working    temperature 0℃~60℃ (horizontal    installation), 0℃~40℃ (vertical installation)
Transportation temperature -20℃~80℃
Relative humidity 5~95%,no   condensation (RHgrade,comform to the IEC61131-2)
Electromagnetic compatibility meet EMC requirement noise rejected, meet the IEC61000-6-2 test meet the IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,
 IEC61000-4-6
             
Mechanical grade IEC60068, Part2-6/10up58Hz constant amplitude0.075mm; 58~150Hz; constant acceleration1g; vibration period:every axis has 10pcs vibration period on each direction of three mutually vertical axis
IP grade IP20
 Order number UN214-1AD23-0XB0 UN214-1BD23-0XB0 UN216-2AD23-0XB0 UN216-2BD23-0XB0 UN214-2AD23-0XB0 UN214-2BD23-0XB0
Model
CPU 224-2Q
 CPU 224-2R
CPU 226-2Q
 CPU 226-2R
CPU 224XP -2Q
CPU224XP-2R
Power consume
7W
10W
11W
17W
7W
17W
Memory
Program  memory
20K
24K
20K
Data Memory
10K( can hold data for 10 years on power down)
20K
I/O Characteristics
14DI
24DI
14DI
Digital input Digital output
10DO
16DO
10DO
Digital I/O Image size
256 ( 128DI/128DO)
Analog I/O Image size
64 (32AI/32AO)
I/O Characteristics
Max.expansio modules allowed
7
Pulse catch input
14
24
14
Total number of high-speed counter
6
Single phase counter
6, each 30KHz
6,30K(4),200K(2),I0.3~I0.5are200KH
I0.0~I0.2 and I0.6~I1.5 are 30KHz
Two phase counter
4, each 20KHz
4,20K(3),100K(1)
Pulse outputs Characteristic
two 30KHz ( only DC output)
-
two 30KHz ( only DC output)
-
two 30KHz ( only DC output)
-
Characteristic
Timers
256 total timers 4timers 1ms, 16 timers 10ms, 236 timers 100ms
Counters
256(backed by super capacitor or battery)
Internal memory bits stored on power down
256
Timed interrupts
Two with 1ms resolution
Edge interrupts
4 up /4 down
Reatime clock
Built-in
Analog adjustment
2 with  8 bit resolution
Inte gration Communication function
Communication port
2 RS485 standard PPI communication ports
PPI baud rate(kbps)
9.6k, 19.2k, 187.5kbps
Freeport baud rates
1.2k-115.2kbaud
Max.cable length per segment
Using isolated potentiometer, 187.5kbps can be 1000 meters,38.4kbps can be 1200 meters
 Non-using isolated potentiometer, then 50meters
Max.number of masters
32
Max.number of stations
32 per segment, 126 per network
Peer to Peer ( PPI Master mode)
Yes
Power   Characteristics
Input voltage
20.4-28.8 VDC
85-264V AC (47-63Hz)
20.4-28.8 VDC
85-264V AC (47-63Hz)
20.4-28.8 VDC
85-264V AC (47-63Hz)
Input Current
110mA (only CUP, 24V DC)
60/30mA (only CPU, 120/240V AC)
110mA (only CPU, 24V DC)
60/30mA (only CPU, 120/240V AC)
110mA (only CPU, 24V DC)
60/30mA (only CPU, 120/240V AC)
Input Current
700mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
1050mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
700mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
Surge current
12A at 28.8 V DC
20A at 264V AC
12A at 28.8 V DC
20A at 264V AC
12A at 28.8 V DC
20A at 264V AC
Isolation (field to logic)
Not isolated
1500V AC
Not isolated
1500V AC
Not isolated
1500V AC
Sensor voltage
L+ minus 5V
20.4-28.8V DC
L+ minus 5V
20.4-28.8V DC
L+ minus 5V
20.4-28.8V DC
Current limit
1.5 A Peak
Ripple Noise
From input power supply
Less than 1V peak-to-peak
From input power supply
Less than 1V peak-to-peak
From input power supply
Less than 1V peak-to-peak
Isolation (sensor and logic)
No isolation
Digital input characteristics
Integration Digital Inputs
14
24
14
Input type
PNP/NPN
Rated voltage
24 VDC 4mA
Max. Continuous permissible voltage
30 VDC
Surge voltage
35 VDC 0.5s
Logic “1”voltage range
15 V~30V DC
15VDC 2.5mA(I0.0~I0.2 and I0.6~I1.5)
4VDC 8mA(I0.3~I0.5)
Logic “0”voltage range
0~5V DC
5VDC 1mA(I0.0~I0.2 and I0.6~I1.5)
1VDC 1mA(I0.3~I0.5)
Input delay
Optional (0.2-12.8ms)
Connection of 2-wire proximity switch sensor (Bero) Permissible leakage current (Max.)
1mA
Isolation
Isolation field to Logic
Yes
Optical(gawanic)
500 V AC for 1 minute
Groups
see wiring diagram
High- speed Counter input rate Logic1 = 15-30V DC
20KHz(single phase), 10KHz ( two phase)
High- speed Counter input rate Logic 1 = 15-26V DC
30KHz(singlephase), 20KHz ( twophase)
Inputs on simultan- eously
all
Cable length ( Max.)
500meters ( standard input)
Shielded
50 meters (High speed counter input)
Unshielded
300 meters ( standard input)
Digital output standard
Integration digital outputs
10
16
10
Type
Solid state - MOSFET (PNP)
Dry contact
Solid state - MOSFET (PNP)
Dry contact
Solid state - MOSFET (PNP)
Dry contact
Rated voltage
24V DC
24V DC or 250V AC
24V DC
24V DC or 250V AC
24 V DC
24 V DC or 250 V AC
Voltage range
20.4-28.8 V DC
5-30V DC / 5-250V AC
20.4-28.8 V DC
5-30V DC / 5-250V AC
5-28.8 V DC(Q0.0-Q0.4)
20.4-28.8VDC(Q0.5-Q1.1)
5-30V DC,5-250V AC
Surge current (Max.)
8 A,100ms
5 A ,4s at 10% work ratio
8 A,100ms
5 A ,4s at 10% work ratio
8 A,100ms
5 A ,4s at 10% work ratio
Logic 1 (Min.)
20V DC (Max.Current)
-
20V DC (Max.Current)
-
L+ minus 0.4V (Max.Current)
-
Logic 0 (Max.)
0.1V DC 10KΩload
-
0.1V DC 10KΩload
-
0.1V DC10KΩload
-
Rated current per point (Max.)
0.75A
2A
0.75A
2A
0.75A
2A
Rated current per common (Max.)
6A
10A
6A
10A
6A
10A
Leakage current (Max.)
10µA
-
10µA
-
10µA
-
Lamp load (Max.)
5W
30W DC, 200W AC
5W
30W DC,200W AC
5W
30W DC,200W AC
Inductive clamp voltage
L+minus 48 VDC, 1W power dissipation
-
L+minus 48 VDC, 1W power dissipation
-
L+minus 48 VDC, 1W power dissipation
-
On state resistance (contact)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
Isolation
Optical galvanic (field to logic)
500V AC for 1min.
-
500V AC for 1min.
-
500V AC for 1min.
Logic to contact
-
500VAC for 1min.
-
500V AC for 1min.
-
500V AC for 1min.
Isolation
Resistance (logic to contact)
-
100mΩ
-
100mΩ
-
100mΩ
Isolation groups
See wiring diagram
Off to on
2µs (Q0.0, Q0.1), 15µs (other)
-
2µs (Q0.0, Q0.1), 15µs (other)
-
2µs (Q0.0, Q0.1), 15µs (other)

On to off
10µs (Q0.0, Q0.1), 130µs (other)
-
10µs (Q0.0, Q0.1), 130µs (other)
-
10µs (Q0.0, Q0.1), 130µs (other)
-
Switching
-
10ms
-
10ms
-
10ms
Pulse frequency (Max.)
20kHz (Q0.0 and Q0.1)
1Hz
20kHz  (Q0.0 and Q0.1)
1Hz
100kHz (Q0.0 and Q0.1)
1Hz
Mechanical life cycle
-
10,000,000 (non load)
-
10,000,000 (non load)
-
10,000,000 (non load)
Contact lifetime
-
100 (Rated load)
-
100 (Rated load)
-
100 (Rated load)
Outputs of simulta- neously connect
All output at 60℃ (Horizontal)
All output at 50℃ ( Vertical)
Connecting two outputs in parallel
Yes, only outputs in same group
no
Yes, only outputs in same group
no
Yes, only outputs in same group
no
Shielded
500m
Unshielded
150m
Analog input characteristics
Integrated analog input points
-
-
2 inputs
Analog input bytes
-
-
single-ended
Voltage         range 
-
-
±10V
Data word fomat,full-scale
-
-
-32000~+32000
DC input
-
-
>100KΩ
Max input voltage
-
-
30VDC
Resolution
-
-
11 bits
LSB value
-
-
4.88mV
Isolation
-
-
None
Accuracy
-
-
±2.5%full-scale (worst loditions 0-55degree)
±1.0%full-scale (typical 25degree)
Repeatity
-
-
±0.05%full-scale
Analog to digital conversion time
-
-
125ms
Change bit
-
-
SAR
Step response
-
-
max 250ms
 Noise restrain
-
-
typical-40dB@50Hz
Analog output characteristics
Integrated AO 
-
-
1 output
Signal range
-
-
voltage 0-10V, current 0-20mA
Data word fomat, full-scale
-
-
0~32000
Vesolution
-
-
12bits
LSB value
-
-
voltage 0-10V, current 0-20mA
 Isolation
-
-
None
Accuracy
-
-
worst condition
voltage output ±2% full scale, current output ±3% full scale
typical  condition
voltage output ±1% full scale, current output ±1% full scale
Build time
-
-
voltage output 50us, current output 100us
Max output drive
-
-
voltage output min≥ 5000Ω, current output max≤500Ω
Environment parameter
Working    temperature
0℃~60℃ (horizontal    installation), 0℃~40℃ (vertical installation)
Transportation temperature
-20℃~80℃
Relative humidity
5~95%,no   condensation (RHgrade,comform to the IEC61131-2)
Electromagnetic compatibility
meet EMC requirement noise rejected, meet the IEC61000-6-2 test meet the IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,
 IEC61000-4-6
Mechanical grade
IEC60068, Part2-6/10up58Hz constant amplitude0.075mm; 58~150Hz; constant acceleration1g; vibration period:every axis has 10pcs vibration period on each direction of three mutually vertical axis
IP grade
IP20
 Order number
UN214-1AD23-0XB0
UN214-1BD23-0XB0
UN216-2AD23-0XB0
UN216-2BD23-0XB0
UN214-2AD23-0XB0
UN214-2BD23-0XB0
Структура и схема подключения CPU 224XP
....

CPU224XP DC/DC/DC

CPU224XP AC/DC/RLY

Model CPU 224-2Q  CPU 224-2R  CPU 226-2Q  CPU 226-2R  CPU 224XP -2Q CPU224XP-2R
Power consume 7W 10W 11W 17W 7W 17W
Memory
Program  memory 20K 24K 20K
Data Memory 10K( can hold data for 10 years on power down) 20K
I/O Characteristics 14DI 24DI 14DI
Digital input Digital output 10DO 16DO 10DO
Digital I/O Image size 256 ( 128DI/128DO)
Analog I/O Image size 64 (32AI/32AO)
I/O Characteristics
Max.expansio modules allowed 7
Pulse catch input 14 24 14
Total number of high-speed counter 6
Single phase counter 6, each 30KHz 6,30K(4),200K(2),I0.3~I0.5are200KH
I0.0~I0.2 and I0.6~I1.5 are 30KHz
Two phase counter 4, each 20KHz 4,20K(3),100K(1)
Pulse outputs Characteristic two 30KHz ( only DC output) - two 30KHz ( only DC output) - two 30KHz ( only DC output) -
Characteristic
Timers 256 total timers 4timers 1ms, 16 timers 10ms, 236 timers 100ms
Counters 256(backed by super capacitor or battery)
Internal memory bits stored on power down 256
Timed interrupts Two with 1ms resolution
Edge interrupts 4 up /4 down
Reatime clock Built-in
Analog adjustment 2 with  8 bit resolution
Inte gration Communication function
Communication port 2 RS485 standard PPI communication ports
PPI baud rate(kbps)  9.6k, 19.2k, 187.5kbps
Freeport baud rates 1.2k-115.2kbaud
Max.cable length per segment Using isolated potentiometer, 187.5kbps can be 1000 meters,38.4kbps can be 1200 meters
 Non-using isolated potentiometer, then 50meters
Max.number of masters 32
Max.number of stations 32 per segment, 126 per network
Peer to Peer ( PPI Master mode) Yes
Power   Characteristics
Input voltage 20.4-28.8 VDC 85-264V AC (47-63Hz) 20.4-28.8 VDC 85-264V AC (47-63Hz) 20.4-28.8 VDC 85-264V AC (47-63Hz)
Input Current 110mA (only CUP, 24V DC) 60/30mA (only CPU, 120/240V AC) 110mA (only CPU, 24V DC) 60/30mA (only CPU, 120/240V AC) 110mA (only CPU, 24V DC) 60/30mA (only CPU, 120/240V AC)
Input Current 700mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC) 1050mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC) 700mA ( Max. Load, 24V DC) 200/100mA (Max. Load, 120/240V AC)
Surge current 12A at 28.8 V DC 20A at 264V AC 12A at 28.8 V DC 20A at 264V AC 12A at 28.8 V DC 20A at 264V AC
Isolation (field to logic) Not isolated 1500V AC Not isolated 1500V AC Not isolated 1500V AC
Sensor voltage L+ minus 5V 20.4-28.8V DC L+ minus 5V 20.4-28.8V DC L+ minus 5V 20.4-28.8V DC
Current limit 1.5 A Peak
Ripple Noise From input power supply Less than 1V peak-to-peak From input power supply Less than 1V peak-to-peak From input power supply Less than 1V peak-to-peak
Isolation (sensor and logic) No isolation
Digital input characteristics
Integration Digital Inputs 14 24 14
Input type PNP/NPN
Rated voltage 24 VDC 4mA
Max. Continuous permissible voltage 30 VDC
Surge voltage 35 VDC 0.5s
Logic “1”voltage range 15 V~30V DC 15VDC 2.5mA(I0.0~I0.2 and I0.6~I1.5)
4VDC 8mA(I0.3~I0.5)
Logic “0”voltage range 0~5V DC 5VDC 1mA(I0.0~I0.2 and I0.6~I1.5)
1VDC 1mA(I0.3~I0.5)
Input delay Optional (0.2-12.8ms)
Connection of 2-wire proximity switch sensor (Bero) Permissible leakage current (Max.) 1mA
Isolation
Isolation field to Logic Yes
Optical(gawanic) 500 V AC for 1 minute
Groups see wiring diagram
High- speed Counter input rate Logic1 = 15-30V DC 20KHz(single phase), 10KHz ( two phase)
High- speed Counter input rate Logic 1 = 15-26V DC 30KHz(singlephase), 20KHz ( twophase)
Inputs on simultan- eously all
Cable length ( Max.) 500meters ( standard input)
Shielded 50 meters (High speed counter input)
Unshielded 300 meters ( standard input)
Digital output standard
Integration digital outputs 10 16 10
Type Solid state - MOSFET (PNP) Dry contact Solid state - MOSFET (PNP) Dry contact Solid state - MOSFET (PNP) Dry contact
Rated voltage 24V DC 24V DC or 250V AC 24V DC 24V DC or 250V AC 24 V DC 24 V DC or 250 V AC
Voltage range 20.4-28.8 V DC 5-30V DC / 5-250V AC 20.4-28.8 V DC 5-30V DC / 5-250V AC 5-28.8 V DC(Q0.0-Q0.4)
20.4-28.8VDC(Q0.5-Q1.1)
5-30V DC,5-250V AC
Surge current (Max.) 8 A,100ms 5 A ,4s at 10% work ratio 8 A,100ms 5 A ,4s at 10% work ratio 8 A,100ms 5 A ,4s at 10% work ratio
Logic 1 (Min.) 20V DC (Max.Current) - 20V DC (Max.Current) - L+ minus 0.4V (Max.Current) -
Logic 0 (Max.) 0.1V DC 10KΩload - 0.1V DC 10KΩload - 0.1V DC10KΩload -
Rated current per point (Max.) 0.75A 2A 0.75A 2A 0.75A 2A
Rated current per common (Max.) 6A 10A 6A 10A 6A 10A
Leakage current (Max.) 10µA - 10µA - 10µA -
Lamp load (Max.) 5W 30W DC, 200W AC 5W 30W DC,200W AC 5W 30W DC,200W AC
Inductive clamp voltage L+minus 48 VDC, 1W power dissipation - L+minus 48 VDC, 1W power dissipation - L+minus 48 VDC, 1W power dissipation -
On state resistance (contact) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new) 0.3 Ω Typical (0.6Ω max.) 0.2 Ω (max.When new)
Isolation
Optical galvanic (field to logic) 500V AC for 1min. - 500V AC for 1min. - 500V AC for 1min.
Logic to contact - 500VAC for 1min. - 500V AC for 1min. - 500V AC for 1min.
Isolation
Resistance (logic to contact) - 100mΩ - 100mΩ - 100mΩ
Isolation groups See wiring diagram
Off to on 2µs (Q0.0, Q0.1), 15µs (other) - 2µs (Q0.0, Q0.1), 15µs (other) - 2µs (Q0.0, Q0.1), 15µs (other)  
On to off 10µs (Q0.0, Q0.1), 130µs (other) - 10µs (Q0.0, Q0.1), 130µs (other) - 10µs (Q0.0, Q0.1), 130µs (other) -
Switching - 10ms - 10ms - 10ms
Pulse frequency (Max.) 20kHz (Q0.0 and Q0.1) 1Hz 20kHz  (Q0.0 and Q0.1) 1Hz 100kHz (Q0.0 and Q0.1) 1Hz
Mechanical life cycle - 10,000,000 (non load) - 10,000,000 (non load) - 10,000,000 (non load)
Contact lifetime - 100 (Rated load) - 100 (Rated load) - 100 (Rated load)
Outputs of simulta- neously connect All output at 60℃ (Horizontal)
All output at 50℃ ( Vertical)
Connecting two outputs in parallel Yes, only outputs in same group no Yes, only outputs in same group no Yes, only outputs in same group no
Shielded 500m
Unshielded 150m
Analog input characteristics
Integrated analog input points - - 2 inputs
Analog input bytes  - - single-ended
Voltage         range   - - ±10V
Data word fomat,full-scale - - -32000~+32000
DC input - - >100KΩ
Max input voltage - - 30VDC
Resolution - - 11 bits
LSB value  - - 4.88mV
Isolation - - None
Accuracy  - - ±2.5%full-scale (worst loditions 0-55degree)
±1.0%full-scale (typical 25degree)
Repeatity - - ±0.05%full-scale
Analog to digital conversion time - - 125ms
Change bit - - SAR
Step response - - max 250ms
 Noise restrain - - typical-40dB@50Hz
Analog output characteristics
Integrated AO   - - 1 output
Signal range - - voltage 0-10V, current 0-20mA
Data word fomat, full-scale - - 0~32000
Vesolution  - - 12bits
LSB value - - voltage 0-10V, current 0-20mA
 Isolation - - None
Accuracy - - worst condition
voltage output ±2% full scale, current output ±3% full scale
typical  condition
voltage output ±1% full scale, current output ±1% full scale
Build time  - - voltage output 50us, current output 100us
Max output drive - - voltage output min≥ 5000Ω, current output max≤500Ω
Environment parameter
Working    temperature 0℃~60℃ (horizontal    installation), 0℃~40℃ (vertical installation)
Transportation temperature -20℃~80℃
Relative humidity 5~95%,no   condensation (RHgrade,comform to the IEC61131-2)
Electromagnetic compatibility meet EMC requirement noise rejected, meet the IEC61000-6-2 test meet the IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,
 IEC61000-4-6
             
Mechanical grade IEC60068, Part2-6/10up58Hz constant amplitude0.075mm; 58~150Hz; constant acceleration1g; vibration period:every axis has 10pcs vibration period on each direction of three mutually vertical axis
IP grade IP20
 Order number UN214-1AD23-0XB0 UN214-1BD23-0XB0 UN216-2AD23-0XB0 UN216-2BD23-0XB0 UN214-2AD23-0XB0 UN214-2BD23-0XB0
Model
CPU 224-2Q
 CPU 224-2R
CPU 226-2Q
 CPU 226-2R
CPU 224XP -2Q
CPU224XP-2R
Power consume
7W
10W
11W
17W
7W
17W
Memory
Program  memory
20K
24K
20K
Data Memory
10K( can hold data for 10 years on power down)
20K
I/O Characteristics
14DI
24DI
14DI
Digital input Digital output
10DO
16DO
10DO
Digital I/O Image size
256 ( 128DI/128DO)
Analog I/O Image size
64 (32AI/32AO)
I/O Characteristics
Max.expansio modules allowed
7
Pulse catch input
14
24
14
Total number of high-speed counter
6
Single phase counter
6, each 30KHz
6,30K(4),200K(2),I0.3~I0.5are200KH
I0.0~I0.2 and I0.6~I1.5 are 30KHz
Two phase counter
4, each 20KHz
4,20K(3),100K(1)
Pulse outputs Characteristic
two 30KHz ( only DC output)
-
two 30KHz ( only DC output)
-
two 30KHz ( only DC output)
-
Characteristic
Timers
256 total timers 4timers 1ms, 16 timers 10ms, 236 timers 100ms
Counters
256(backed by super capacitor or battery)
Internal memory bits stored on power down
256
Timed interrupts
Two with 1ms resolution
Edge interrupts
4 up /4 down
Reatime clock
Built-in
Analog adjustment
2 with  8 bit resolution
Inte gration Communication function
Communication port
2 RS485 standard PPI communication ports
PPI baud rate(kbps)
9.6k, 19.2k, 187.5kbps
Freeport baud rates
1.2k-115.2kbaud
Max.cable length per segment
Using isolated potentiometer, 187.5kbps can be 1000 meters,38.4kbps can be 1200 meters
 Non-using isolated potentiometer, then 50meters
Max.number of masters
32
Max.number of stations
32 per segment, 126 per network
Peer to Peer ( PPI Master mode)
Yes
Power   Characteristics
Input voltage
20.4-28.8 VDC
85-264V AC (47-63Hz)
20.4-28.8 VDC
85-264V AC (47-63Hz)
20.4-28.8 VDC
85-264V AC (47-63Hz)
Input Current
110mA (only CUP, 24V DC)
60/30mA (only CPU, 120/240V AC)
110mA (only CPU, 24V DC)
60/30mA (only CPU, 120/240V AC)
110mA (only CPU, 24V DC)
60/30mA (only CPU, 120/240V AC)
Input Current
700mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
1050mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
700mA ( Max. Load, 24V DC)
200/100mA (Max. Load, 120/240V AC)
Surge current
12A at 28.8 V DC
20A at 264V AC
12A at 28.8 V DC
20A at 264V AC
12A at 28.8 V DC
20A at 264V AC
Isolation (field to logic)
Not isolated
1500V AC
Not isolated
1500V AC
Not isolated
1500V AC
Sensor voltage
L+ minus 5V
20.4-28.8V DC
L+ minus 5V
20.4-28.8V DC
L+ minus 5V
20.4-28.8V DC
Current limit
1.5 A Peak
Ripple Noise
From input power supply
Less than 1V peak-to-peak
From input power supply
Less than 1V peak-to-peak
From input power supply
Less than 1V peak-to-peak
Isolation (sensor and logic)
No isolation
Digital input characteristics
Integration Digital Inputs
14
24
14
Input type
PNP/NPN
Rated voltage
24 VDC 4mA
Max. Continuous permissible voltage
30 VDC
Surge voltage
35 VDC 0.5s
Logic “1”voltage range
15 V~30V DC
15VDC 2.5mA(I0.0~I0.2 and I0.6~I1.5)
4VDC 8mA(I0.3~I0.5)
Logic “0”voltage range
0~5V DC
5VDC 1mA(I0.0~I0.2 and I0.6~I1.5)
1VDC 1mA(I0.3~I0.5)
Input delay
Optional (0.2-12.8ms)
Connection of 2-wire proximity switch sensor (Bero) Permissible leakage current (Max.)
1mA
Isolation
Isolation field to Logic
Yes
Optical(gawanic)
500 V AC for 1 minute
Groups
see wiring diagram
High- speed Counter input rate Logic1 = 15-30V DC
20KHz(single phase), 10KHz ( two phase)
High- speed Counter input rate Logic 1 = 15-26V DC
30KHz(singlephase), 20KHz ( twophase)
Inputs on simultan- eously
all
Cable length ( Max.)
500meters ( standard input)
Shielded
50 meters (High speed counter input)
Unshielded
300 meters ( standard input)
Digital output standard
Integration digital outputs
10
16
10
Type
Solid state - MOSFET (PNP)
Dry contact
Solid state - MOSFET (PNP)
Dry contact
Solid state - MOSFET (PNP)
Dry contact
Rated voltage
24V DC
24V DC or 250V AC
24V DC
24V DC or 250V AC
24 V DC
24 V DC or 250 V AC
Voltage range
20.4-28.8 V DC
5-30V DC / 5-250V AC
20.4-28.8 V DC
5-30V DC / 5-250V AC
5-28.8 V DC(Q0.0-Q0.4)
20.4-28.8VDC(Q0.5-Q1.1)
5-30V DC,5-250V AC
Surge current (Max.)
8 A,100ms
5 A ,4s at 10% work ratio
8 A,100ms
5 A ,4s at 10% work ratio
8 A,100ms
5 A ,4s at 10% work ratio
Logic 1 (Min.)
20V DC (Max.Current)
-
20V DC (Max.Current)
-
L+ minus 0.4V (Max.Current)
-
Logic 0 (Max.)
0.1V DC 10KΩload
-
0.1V DC 10KΩload
-
0.1V DC10KΩload
-
Rated current per point (Max.)
0.75A
2A
0.75A
2A
0.75A
2A
Rated current per common (Max.)
6A
10A
6A
10A
6A
10A
Leakage current (Max.)
10µA
-
10µA
-
10µA
-
Lamp load (Max.)
5W
30W DC, 200W AC
5W
30W DC,200W AC
5W
30W DC,200W AC
Inductive clamp voltage
L+minus 48 VDC, 1W power dissipation
-
L+minus 48 VDC, 1W power dissipation
-
L+minus 48 VDC, 1W power dissipation
-
On state resistance (contact)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
0.3 Ω Typical (0.6Ω max.)
0.2 Ω (max.When new)
Isolation
Optical galvanic (field to logic)
500V AC for 1min.
-
500V AC for 1min.
-
500V AC for 1min.
Logic to contact
-
500VAC for 1min.
-
500V AC for 1min.
-
500V AC for 1min.
Isolation
Resistance (logic to contact)
-
100mΩ
-
100mΩ
-
100mΩ
Isolation groups
See wiring diagram
Off to on
2µs (Q0.0, Q0.1), 15µs (other)
-
2µs (Q0.0, Q0.1), 15µs (other)
-
2µs (Q0.0, Q0.1), 15µs (other)

On to off
10µs (Q0.0, Q0.1), 130µs (other)
-
10µs (Q0.0, Q0.1), 130µs (other)
-
10µs (Q0.0, Q0.1), 130µs (other)
-
Switching
-
10ms
-
10ms
-
10ms
Pulse frequency (Max.)
20kHz (Q0.0 and Q0.1)
1Hz
20kHz  (Q0.0 and Q0.1)
1Hz
100kHz (Q0.0 and Q0.1)
1Hz
Mechanical life cycle
-
10,000,000 (non load)
-
10,000,000 (non load)
-
10,000,000 (non load)
Contact lifetime
-
100 (Rated load)
-
100 (Rated load)
-
100 (Rated load)
Outputs of simulta- neously connect
All output at 60℃ (Horizontal)
All output at 50℃ ( Vertical)
Connecting two outputs in parallel
Yes, only outputs in same group
no
Yes, only outputs in same group
no
Yes, only outputs in same group
no
Shielded
500m
Unshielded
150m
Analog input characteristics
Integrated analog input points
-
-
2 inputs
Analog input bytes
-
-
single-ended
Voltage         range 
-
-
±10V
Data word fomat,full-scale
-
-
-32000~+32000
DC input
-
-
>100KΩ
Max input voltage
-
-
30VDC
Resolution
-
-
11 bits
LSB value
-
-
4.88mV
Isolation
-
-
None
Accuracy
-
-
±2.5%full-scale (worst loditions 0-55degree)
±1.0%full-scale (typical 25degree)
Repeatity
-
-
±0.05%full-scale
Analog to digital conversion time
-
-
125ms
Change bit
-
-
SAR
Step response
-
-
max 250ms
 Noise restrain
-
-
typical-40dB@50Hz
Analog output characteristics
Integrated AO 
-
-
1 output
Signal range
-
-
voltage 0-10V, current 0-20mA
Data word fomat, full-scale
-
-
0~32000
Vesolution
-
-
12bits
LSB value
-
-
voltage 0-10V, current 0-20mA
 Isolation
-
-
None
Accuracy
-
-
worst condition
voltage output ±2% full scale, current output ±3% full scale
typical  condition
voltage output ±1% full scale, current output ±1% full scale
Build time
-
-
voltage output 50us, current output 100us
Max output drive
-
-
voltage output min≥ 5000Ω, current output max≤500Ω
Environment parameter
Working    temperature
0℃~60℃ (horizontal    installation), 0℃~40℃ (vertical installation)
Transportation temperature
-20℃~80℃
Relative humidity
5~95%,no   condensation (RHgrade,comform to the IEC61131-2)
Electromagnetic compatibility
meet EMC requirement noise rejected, meet the IEC61000-6-2 test meet the IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5,
 IEC61000-4-6
Mechanical grade
IEC60068, Part2-6/10up58Hz constant amplitude0.075mm; 58~150Hz; constant acceleration1g; vibration period:every axis has 10pcs vibration period on each direction of three mutually vertical axis
IP grade
IP20
 Order number
UN214-1AD23-0XB0
UN214-1BD23-0XB0
UN216-2AD23-0XB0
UN216-2BD23-0XB0
UN214-2AD23-0XB0
UN214-2BD23-0XB0

Технические характеристики СPU:

Структура и схема подключения CPU 284
....

CPU 284 DC/DC/DC

CPU284 AC/DC/RLY

Структура и схема подключения CPU 286
..............................................................................................................................................CPU 286 DC/DC/DC
Model CPU 284-3Q CPU 284-3R CPU 286-2Q
Power consume 7W 10W 12W
Memory
Program  memory 20K 24K
Data Memory 10K( can hold data for 10 years on power down)
I/O Characteristics
Max.expansion modules allowed  7
Total number of high-speed counter 6
Single phase counter 6,each 30K 6,each 200K
Two phase counter 4,each 20K 4,each 100K
Pulse outputs Two 30KHz(only DC output) - 4 axis 200KHz
Characteristic
Timers 256total timers,4timers 1ms,16timers 10ms,236timers 100ms
Counters 256
Internal memory bits stored on power down 256
Timed   interrupts Two with 1ms resolution
Edge interrupts 4 UP/4 down
Analog  adjustment 2 with 8bit resolution
Realtime clock built-in
Integration  communication  function
Communication port  3 RS485 standard PPI communication ports 2 RS485 standard PPI   communication ports
 PPI baud rate  9.6,19.2,187.5kbps 9.6,19.2kbps
Freeport baud rate 1.2k-115.2kbps
Max.cable length per  segment  Using   isolated potentiometer, 187.5kbps   can be 1000meters,38.4kbps can be 1200meters Non-using isolated potentiometer, then 50meters
Input voltage 20.4-28.8V DC 85-264V AC(47-63Hz) 20.4-28.8V DC
Input current 110mA(only CPU,24VDC) 60/30mA (only CPU,120/240VAC) 150mA (only CPU,24VDC)
Digital  input/output  characteristics
Integration DI 14 24
Input type PNP/NPN
Rated voltage 24VDC,4mA typical
Logic”1”voltage   range 15~30VDC
Logic”0”voltage   range 0~5VDC
Permissible leakage current (Max.) 1mA
Integration DO 10 16
Output type Solid state-MOSFET(PNP) Dry contact Solid state-MOSFET(PNP)
Rated voltage 24VDC 24VDC or 250VAC 24VDC
Voltage range 20.4-28.8VDC 5-30VDC or 5-250VAC 5-28.8VDC
Surge current(Max.) 8A,100ms 5A,4s at 10% work ratio 8A,100ms
Logic 1 (Min.) 20VDC,Max.current - 0.5V
Logic 0 (Max.) 0.1VDC,10KΩload - VCC minus0.5V
Rated current per point (Max.) 0.75A 2.0A 0.5A
Rated current per common (Max.) 6A 10A 4A
Lamp load(Max.) 5W 30WDC,200WAC 3.5W
Pulse   frequency(Max.) 20KHz(Q0.0,Q0.1) 1Hz 4 axis:200KHz(Q0.0~Q0.7),1KHz(Other)
Contact life time - 100000(Rated load) -
Dimension( WxHxD) 140x80x62 196x80x62
Order number UN 284-3AD23-0XB0 UN 284-3BD23-0XB0 UN 286-2AM23-0XB0
Model
CPU 284-3Q
CPU 284-3R
CPU 286-2Q
Power consume
7W
10W
12W
Memory
Program  memory
20K
24K
Data Memory
10K( can hold data for 10 years on power down)
I/O Characteristics
Max.expansion modules allowed
7
Total number of high-speed counter
6
Single phase counter
6,each 30K
6,each 200K
Two phase counter
4,each 20K
4,each 100K
Pulse outputs
Two 30KHz(only DC output)
-
4 axis 200KHz
Characteristic
Timers
256total timers,4timers 1ms,16timers 10ms,236timers 100ms
Counters
256
Internal memory bits stored on power down
256
Timed   interrupts
Two with 1ms resolution
Edge interrupts
4 UP/4 down
Analog  adjustment
2 with 8bit resolution
Realtime clock
built-in
Integration  communication  function
Communication port
3 RS485 standard PPI communication ports
2 RS485 standard PPI   communication ports
 PPI baud rate
9.6,19.2,187.5kbps
9.6,19.2kbps
Freeport baud rate
1.2k-115.2kbps
Max.cable length per  segment
Using   isolated potentiometer, 187.5kbps   can be 1000meters,38.4kbps can be 1200meters Non-using isolated potentiometer, then 50meters
Input voltage
20.4-28.8V DC
85-264V AC(47-63Hz)
20.4-28.8V DC
Input current
110mA(only CPU,24VDC)
60/30mA (only CPU,120/240VAC)
150mA (only CPU,24VDC)
Digital  input/output  characteristics
Integration DI
14
24
Input type
PNP/NPN
Rated voltage
24VDC,4mA typical
Logic”1”voltage   range
15~30VDC
Logic”0”voltage   range
0~5VDC
Permissible leakage current (Max.)
1mA
Integration DO
10
16
Output type
Solid state-MOSFET(PNP)
Dry contact
Solid state-MOSFET(PNP)
Rated voltage
24VDC
24VDC or 250VAC
24VDC
Voltage range
20.4-28.8VDC
5-30VDC or 5-250VAC
5-28.8VDC
Surge current(Max.)
8A,100ms
5A,4s at 10% work ratio
8A,100ms
Logic 1 (Min.)
20VDC,Max.current
-
0.5V
Logic 0 (Max.)
0.1VDC,10KΩload
-
VCC minus0.5V
Rated current per point (Max.)
0.75A
2.0A
0.5A
Rated current per common (Max.)
6A
10A
4A
Lamp load(Max.)
5W
30WDC,200WAC
3.5W
Pulse   frequency(Max.)
20KHz(Q0.0,Q0.1)
1Hz
4 axis:200KHz(Q0.0~Q0.7),1KHz(Other)
Contact life time
-
100000(Rated load)
-
Dimension( WxHxD)
140x80x62
196x80x62
Order number
UN 284-3AD23-0XB0
UN 284-3BD23-0XB0
UN 286-2AM23-0XB0

Модули расширения для UN 200:

Модули дискретных входов EM 221
EM221 8DI 24V DC

EM221 16DI 24V DC

EM221 32DI 24V DC
Model EM221  8 inputs EM221  16 inputs EM221  32 inputs
From bus current consumption 40mA 85mA 140mA
Power loss 2W 3W 5.2W
Number of digital inputs 8 16 32
Signal input type· PNP/NPN PNP/NPN PNP/NPN
Input voltage range 24VDC,4mA 24VDC,4mA 24V DC,4mA
Maximum input voltage 30V DC 30V DC 30V DC
Surge voltage 35V DC,0.5s 35V DC,0.5s 35V DC,0.5s
Logic 0 signal 0~5V DC 0~5V DC 0~5V DC
Logic 1 signal 15~30V DC 15~30V DC 15~30V DC
Input delay(max) 4.5ms 4.5ms 4.5ms
Optical isolation(Galvanic) (Field Side to Logic) 500 V AC for 1 minute 500 V AC for 1 minute 500 V AC for 1 minute
Premissible leakage current(Bero) 1mA 1mA 1mA
Cable Length 500m(Shielded ) 500m(Shielded ) 500m(Shielded)
  300m(Unshielded) 300m(Unshielded) 300m(Unshielded)
Dimensions(W x H x D)(mm) 46×80×62 71.2×80×62 137.5×80×62
Order Number UN 221-1BF22-0XA0 UN 221-1BH22-0XA0 UN 221-1BL22-0XA0
ModelEM221  8 inputsEM221  16 inputsEM221  32 inputsFrom bus current consumption40mA85mA140mAPower loss2W3W5.2WNumber of digital inputs81632Signal input type·PNP/NPNPNP/NPNPNP/NPNInput voltage range24VDC,4mA24VDC,4mA24V DC,4mAMaximum input voltage30V DC30V DC30V DCSurge voltage35V DC,0.5s35V DC,0.5s35V DC,0.5sLogic 0 signal0~5V DC0~5V DC0~5V DCLogic 1 signal15~30V DC15~30V DC15~30V DCInput delay(max)4.5ms4.5ms4.5msOptical isolation(Galvanic) (Field Side to Logic)500 V AC for 1 minute500 V AC for 1 minute500 V AC for 1 minutePremissible leakage current(Bero)1mA1mA1mACable Length500m(Shielded )500m(Shielded )500m(Shielded) 300m(Unshielded)300m(Unshielded)300m(Unshielded)Dimensions(W x H x D)(mm)46×80×6271.2×80×62137.5×80×62Order NumberUN 221-1BF22-0XA0UN 221-1BH22-0XA0UN 221-1BL22-0XA0

Модули дискретных выходов EM 222
EM222 8 outputs, Transistor

EM222 8 outputs, Relay

EM222 16 outputs, Transistor
EM222 16 outputs, Relay...................................EM222 32 outputs, Transistor
Model EM222 8 outputs, Transistor EM222  8 outputs, Relay EM222  16 outputs, Transistor EM222  16 outputs, Relay EM222 32 outputs, Transistor
Product  Description 8DO,24V DC, Transistor 8DO,24V DC/250V AC 16DO,24V DC; Transistor; 16DO,24V DC/250V AC 32DO,24V DC; Transistor;
    Relay; high immunity Optical isolation with high immunity Relay; high immunity Optical isolation with high immunity
The bus current consumption 65mA 60mA 110mA 98mA 140mA
Power loss 2W 3W 3W 3W 5.2W
Number ofdigital contact 8 8 16 16 32
Output type Transistor Relay Transistor Relay Transistor
Isolation tested for contact Optocoupler Relay Optical coupler Relay Optical coupler
Rated voltage 24 V DC 24V DC or 250V AC 24V DC 24V DC or 250V AC 24V DC
Voltage range 20.4~28.8VDC 5~30V DC,20~250V AC 20.4~28.8V DC 5~30V DC,20~250V AC 20.4~28.8V DC
Rated voltage 0.75A 2.0A 0.75A 2A 0.75A
Lamp loadswitching frequency 5W 30W DC/200W AC 5W 30W DC/200W AC 5W
Cable length(shielded) 500m 500m 500m 500m 500m
Cable length(unshielded) 150m 150m 150m 150m 150m
Switching frequency - 1Hz - 1Hz -
Lifetime contact mechanical - 10,000,000 - 10,000,000 -
Lifetime contact mechanical (rated load voltage) - 100 - 100 -
Dimensions(W x H x D)(mm) 46×80×62 46×80×62 71.2×80×62 71.2×80×62 137.5×80×62
Order No UN 222-1BF22-0XA0 UN 222-1HF22-0XA0 UN 222-1BH22-0XA0 UN 222-1HH22-0XA0 UN 222-1BL22-0XA0
Model
EM222 8 outputs, Transistor
EM222  8 outputs, Relay
EM222  16 outputs, Transistor
EM222  16 outputs, Relay
EM222 32 outputs, Transistor
Product  Description
8DO,24V DC, Transistor
8DO,24V DC/250V AC
16DO,24V DC; Transistor;
16DO,24V DC/250V AC
32DO,24V DC; Transistor;


Relay; high immunity
Optical isolation with high immunity
Relay; high immunity
Optical isolation with high immunity
The bus current consumption
65mA
60mA
110mA
98mA
140mA
Power loss
2W
3W
3W
3W
5.2W
Number ofdigital contact
8
8
16
16
32
Output type
Transistor
Relay
Transistor
Relay
Transistor
Isolation tested for contact
Optocoupler
Relay
Optical coupler
Relay
Optical coupler
Rated voltage
24 V DC
24V DC or 250V AC
24V DC
24V DC or 250V AC
24V DC
Voltage range
20.4~28.8VDC
5~30V DC,20~250V AC
20.4~28.8V DC
5~30V DC,20~250V AC
20.4~28.8V DC
Rated voltage
0.75A
2.0A
0.75A
2A
0.75A
Lamp loadswitching frequency
5W
30W DC/200W AC
5W
30W DC/200W AC
5W
Cable length(shielded)
500m
500m
500m
500m
500m
Cable length(unshielded)
150m
150m
150m
150m
150m
Switching frequency
-
1Hz
-
1Hz
-
Lifetime contact mechanical
-
10,000,000
-
10,000,000
-
Lifetime contact mechanical (rated load voltage)
-
100
-
100
-
Dimensions(W x H x D)(mm)
46×80×62
46×80×62
71.2×80×62
71.2×80×62
137.5×80×62
Order No
UN 222-1BF22-0XA0
UN 222-1HF22-0XA0
UN 222-1BH22-0XA0
UN 222-1HH22-0XA0
UN 222-1BL22-0XA0

Модули дискретных входов/выходов EM 223
EM 223 DI 4DC/DO 4DC......................................................EM 223 4DI, 24 V DC/4DO, 24 V DC/250 V AC
EM 223 8DI,24VDC/8DO,24VDC.........................................EM 223 8DI,24VDC/8DO, 24 VDC/250VAC
EM 223 16DI,24VDC/16DO, 24VDC.......................................EM 223 16DI,24VDC/16DO, 24 VDC/250V AC
Model EM223 
4 inputs/outputs
EM223 
4 inputs/outputs
EM223 
8 inputs/outputs
EM223 
8 inputs/outputs
EM223 
16 inputs/outputs
EM223 
16 inputs/outputs
Product  Description 4DI,24VDC/4DO,24VDC 4DI, 24 V DC/
4DO, 24 V DC/250 V AC,
8DI,24VDC/8DO,24VDC 8DI,24VDC/
8DO, 24 VDC/250VAC,
16DI,24VDC/16DO, 24VDC 16DI,24VDC/
16DO, 24 VDC/250VAC,
Transistor; Relay; Transistor; Relay; Transistor; Relay;
Optical isolation with high immunity Relay isolation with high immunity. Optical isolation with high immunity Relay isolation with high immunity. Optical isolation with high immunity. Relay isolation with high immunity.
From bus current consumption 40mA 40mA 80mA 80mA 140mA 140mA
Power loss 2W 2W 3W 3W 5.2W 5.2W
Input Features
Number of digital inputs 4 4 8 8 16 16
Input voltage 24V DC,4mA 24V DC,4mA 24V 4mA 24 VDC,4mA 24 VDC 24 VDC,4mA
Logic 0 signal 0~5V DC 0~5V DC 0~5V DC 0~5 VDC 0~5 VDC 0~5 VDC
Logic 1 signal 15~30V DC 15~30V DC 15~30V DC 15~30 VDC 15~30 VDC 15~30 VDC
Maximum Input Delay Time 4.5ms 4.5ms 4.5ms 4.5ms 4.5ms 4.5ms
Signal input type· PNP/NPN PNP/NPN PNP/NPN PNP/NPN PNP/NPN PNP/NPN
Optical isolation(Galvanic) (field to logic) 500 VAC for 1 minute 500 VAC for 1 minute 500VAC,1Min 500 V AC for 1 minute 500 V AC for 1 minute 500 V AC for 1 minute
Cable Length (Shielded) 500m 500m 500m 500m 500m 500m
Cable Length (unshielded) 300m 300m 300m 300m 300m 300m
output Features
Number of digital outputs 4 4 8 8 16 16
Output type Transistor Relay Transistor Relay Transistor Relay
Isolation Optical coupler Relay Optocoupler Relay Optical coupler Relay
Output voltage 24V DC 24V DC or 250V AC 24 VDC 24 VDC 24 VDC or 250V AC 24 VDC
Output voltage range 20.4~28.8V DC 5~30V DC/20~250V AC 20.4~28.8VDC 5~30 VDC/20~250V AC 20.4~28.8V AC 5~30 VDC/20~250V AC
Output Current 0.75A 2.0A 0.75A 2.0A 0.75A 2.0A
Lamp load 5W 30W DC/200W AC 5W 30W DC/20~250W AC 5W 30W DC/200W AC
Lifetime mechanical - 10,000,000 - 10,000,000 - 10,000,000
Lifetime contacts(Rated load voltage - 100 - 100 - 100
Cable Length (Shielded) 500m 500m 500m 500m 500m 500m
Cable Length (unshielded) 150m 150m 150m 150m 150m 150m
Dimensions(W x H x D)(mm) 46×80×62 46×80×62 71.2×80×62 71.2×80×62 137.5×80×62 137.5×80×62
Order Number UN 223-1BF22-0XA0 UN 223-1HF22-0XAO UN 223-1BH22-OXAO UN 223-1PH22-0XA0 UN 223-1BL22-0XA0 UN 223-1PL22-0XA0
Model
EM223
4 inputs/outputs
EM223
4 inputs/outputs
EM223
8 inputs/outputs
EM223
8 inputs/outputs
EM223
16 inputs/outputs
EM223
16 inputs/outputs
Product  Description
4DI,24VDC/4DO,24VDC
4DI, 24 V DC/
4DO, 24 V DC/250 V AC,
8DI,24VDC/8DO,24VDC
8DI,24VDC/
8DO, 24 VDC/250VAC,
16DI,24VDC/16DO, 24VDC
16DI,24VDC/
16DO, 24 VDC/250VAC,
Transistor;
Relay;
Transistor;
Relay;
Transistor;
Relay;
Optical isolation with high immunity
Relay isolation with high immunity.
Optical isolation with high immunity
Relay isolation with high immunity.
Optical isolation with high immunity.
Relay isolation with high immunity.
From bus current consumption
40mA
40mA
80mA
80mA
140mA
140mA
Power loss
2W
2W
3W
3W
5.2W
5.2W
Input Features
Number of digital inputs
4
4
8
8
16
16
Input voltage
24V DC,4mA
24V DC,4mA
24V 4mA
24 VDC,4mA
24 VDC
24 VDC,4mA
Logic 0 signal
0~5V DC
0~5V DC
0~5V DC
0~5 VDC
0~5 VDC
0~5 VDC
Logic 1 signal
15~30V DC
15~30V DC
15~30V DC
15~30 VDC
15~30 VDC
15~30 VDC
Maximum Input Delay Time
4.5ms
4.5ms
4.5ms
4.5ms
4.5ms
4.5ms
Signal input type·
PNP/NPN
PNP/NPN
PNP/NPN
PNP/NPN
PNP/NPN
PNP/NPN
Optical isolation(Galvanic) (field to logic)
500 VAC for 1 minute
500 VAC for 1 minute
500VAC,1Min
500 V AC for 1 minute
500 V AC for 1 minute
500 V AC for 1 minute
Cable Length (Shielded)
500m
500m
500m
500m
500m
500m
Cable Length (unshielded)
300m
300m
300m
300m
300m
300m
output Features
Number of digital outputs
4
4
8
8
16
16
Output type
Transistor
Relay
Transistor
Relay
Transistor
Relay
Isolation
Optical coupler
Relay
Optocoupler
Relay
Optical coupler
Relay
Output voltage
24V DC
24V DC or 250V AC
24 VDC
24 VDC
24 VDC or 250V AC
24 VDC
Output voltage range
20.4~28.8V DC
5~30V DC/20~250V AC
20.4~28.8VDC
5~30 VDC/20~250V AC
20.4~28.8V AC
5~30 VDC/20~250V AC
Output Current
0.75A
2.0A
0.75A
2.0A
0.75A
2.0A
Lamp load
5W
30W DC/200W AC
5W
30W DC/20~250W AC
5W
30W DC/200W AC
Lifetime mechanical
-
10,000,000
-
10,000,000
-
10,000,000
Lifetime contacts(Rated load voltage
-
100
-
100
-
100
Cable Length (Shielded)
500m
500m
500m
500m
500m
500m
Cable Length (unshielded)
150m
150m
150m
150m
150m
150m
Dimensions(W x H x D)(mm)
46×80×62
46×80×62
71.2×80×62
71.2×80×62
137.5×80×62
137.5×80×62
Order Number
UN 223-1BF22-0XA0
UN 223-1HF22-0XAO
UN 223-1BH22-OXAO
UN 223-1PH22-0XA0
UN 223-1BL22-0XA0
UN 223-1PL22-0XA0

Модули аналоговых (входов/выходов) EM 231, ЕМ 232, EM 235
EM231 4 inputs × 12 bits...............................................................EM231 8 inputs × 14 bits
Model EM231 4 inputs × 12 bits EM231 8 inputs × 14 bits
Product  Description 4AI,24V DC,Resolution:12bits, 8AI,24V DC;Resolution:14bits;
High immunity,stable High immunity,stable
Technical Specification
From bus current consumption 20mA 20mA
From L+ current consumption 60mA 60mA
Power loss 2W 2W
Number of analog Inputs 4 8
Input type Differential Differential
Voltange input range: Unipolar 0~5v,0~10V 0~5v,0~10V
Voltange input range: Bipolar ±2.5V,±5V ±2.5V,±10V
input range:current 0~20mA 0~20mA,+ 20mA
Resolution 12 bit 14bit
Bipolar,full-scale range -32,000 to +32,000 -32,000 to +32,000
Unipolar, full-scale range 0 to +32,000 0 to +32,000
Cable Length (unShielded) 300m 300m
Input impedance ≥10M Ω Voltage Input ≥10M Ω Voltage Input
250 Ω Current Input 250 Ω Current Input
Isolation tested for contact (field to logic) No No
Analog to digital conversion time <250µs <250µs
Common-mode rejection 40db,DC to 60Hz 40db,DC to 60Hz
Common-mode voltage Signal voltage + Common-mode voltage≤12V Signal voltage + Common-mode voltage≤12V
Maximum input voltage 30V DC 30V DC
Maximum input current 32mA 32mA
Dimensions(W x H x D)(mm) 71.2×80×62 71.2×80×62
Order Number UN 231-OHC22-0XA0 UN 231-OHF22-0XA0
Model
EM231 4 inputs × 12 bits
EM231 8 inputs × 14 bits
Product  Description
4AI,24V DC,Resolution:12bits,
8AI,24V DC;Resolution:14bits;
High immunity,stable
High immunity,stable
Technical Specification
From bus current consumption
20mA
20mA
From L+ current consumption
60mA
60mA
Power loss
2W
2W
Number of analog Inputs
4
8
Input type
Differential
Differential
Voltange input range: Unipolar
0~5v,0~10V
0~5v,0~10V
Voltange input range: Bipolar
±2.5V,±5V
±2.5V,±10V
input range:current
0~20mA
0~20mA,+ 20mA
Resolution
12 bit
14bit
Bipolar,full-scale range
-32,000 to +32,000
-32,000 to +32,000
Unipolar, full-scale range
0 to +32,000
0 to +32,000
Cable Length (unShielded)
300m
300m
Input impedance
≥10M Ω Voltage Input
≥10M Ω Voltage Input
250 Ω Current Input
250 Ω Current Input
Isolation tested for contact (field to logic)
No
No
Analog to digital conversion time
<250µs
<250µs
Common-mode rejection
40db,DC to 60Hz
40db,DC to 60Hz
Common-mode voltage
Signal voltage + Common-mode voltage≤12V
Signal voltage + Common-mode voltage≤12V
Maximum input voltage
30V DC
30V DC
Maximum input current
32mA
32mA
Dimensions(W x H x D)(mm)
71.2×80×62
71.2×80×62
Order Number
UN 231-OHC22-0XA0
UN 231-OHF22-0XA0
EM232 2outputs ×12bits
EM232 4outputs ×12bits
EM235 4inputs/1outputs ×12bits
Model EM232 2outputs ×12bits EM232 4outputs ×12bits EM235 4inputs/1outputs ×12bits
Product  Description 2AO; 12 bits resolution voltage output; 4AO;Resolution:16bits; 12 bits resolution voltage output; 4AI,1AO; 12 bits resolution voltage output;
11 bits resolution current output 11 bits resolution current output 11 bits resolution current output
Input Feature
From bus current consumption 20mA 22mA 30mA
From L+ current consumption 70mA 92mA 60mA
Power loss 2W 2.5W 2W
Number of analog Input -  - 4
Signal input type -  - Differential
Maximum input voltage -  - 30V
Maximum input current -  - 32mA
Voltange input range: Unipolar -  - 0~50mV, 0~100mV,0~500mV,0~1V,0~5V,0~10V
Voltange input range: Bipolar -  - ±1V, ±2.5V, ±5V, ±10V, ±25mV, ±50mV, ±100mV, ±250mV, ±500mV,
current input range -  - 0~20mA,
Resolution -  - 12bits
Bipolar,full-scale range -  - 0~32,000
Unipolar, full-scale range -  - -32,000~+32,000
Analog to digital conversion time -  - <250µs
Output Feature
Number of analog Input 2 4 1
Input voltage range -10~+10V -10~+10V -10~+10V
Input current range 0~20mA 0~20mA 0~20mA
Load inpedance      
·for voltage outputs Min:5KΩ Min:5KΩ Min:5KΩ
·for current outputs Max:0.5KΩ Max:0.5KΩ Max:0.5KΩ
Resolution 12 bits voltage output; 12 bits voltage output; 12 bits voltage output;
11 bits current output 11 bits current output 11 bits current output
Data word format      
Displayable: voltage output -32,000~+32,000 -32,000~+32,000 -32,000~+32,000
Displayable: current output 0~32,000 0~32,000 0~32,000
Basic error ±0.5% of full range ±0.5% of full range ±0.5% of full range
Dimensions(W x H x D)(mm) 46×80×62 71.2×80×62 71.2×80×62
Order Number UN 232-OHB22-0XA0 UN 232-OHD22-0XA0 UN 235-0KD22-OXAO
ModelEM232 2outputs ×12bitsEM232 4outputs ×12bitsEM235 4inputs/1outputs ×12bitsProduct  Description2AO; 12 bits resolution voltage output;4AO;Resolution:16bits; 12 bits resolution voltage output;4AI,1AO; 12 bits resolution voltage output;11 bits resolution current output11 bits resolution current output11 bits resolution current outputInput FeatureFrom bus current consumption20mA22mA30mAFrom L+ current consumption70mA92mA60mAPower loss2W2.5W2WNumber of analog Input- -4Signal input type- -DifferentialMaximum input voltage- -30VMaximum input current- -32mAVoltange input range: Unipolar- -0~50mV, 0~100mV,0~500mV,0~1V,0~5V,0~10VVoltange input range: Bipolar- -±1V, ±2.5V, ±5V, ±10V, ±25mV, ±50mV, ±100mV, ±250mV, ±500mV,current input range- -0~20mA,Resolution- -12bitsBipolar,full-scale range- -0~32,000Unipolar, full-scale range- --32,000~+32,000Analog to digital conversion time- -<250µsOutput FeatureNumber of analog Input241Input voltage range-10~+10V-10~+10V-10~+10VInput current range0~20mA0~20mA0~20mALoad inpedance   ·for voltage outputsMin:5KΩMin:5KΩMin:5KΩ·for current outputsMax:0.5KΩMax:0.5KΩMax:0.5KΩResolution12 bits voltage output;12 bits voltage output;12 bits voltage output;11 bits current output11 bits current output11 bits current outputData word format   Displayable: voltage output-32,000~+32,000-32,000~+32,000-32,000~+32,000Displayable: current output0~32,0000~32,0000~32,000Basic error±0.5% of full range±0.5% of full range±0.5% of full rangeDimensions(W x H x D)(mm)46×80×6271.2×80×6271.2×80×62Order NumberUN 232-OHB22-0XA0UN 232-OHD22-0XA0UN 235-0KD22-OXAO

Модули температурные EM 231
EM231 2 inputs, RTD.....................................................................EM231 4 inputs, RTD
Model EM231 2 inputs,RTD EM231 4 inputs,RTD
Product  Description 2AI; RTD temperature measurement modules; Resolution:16bits 4AI, RTD temperature measurement modules, Resolution:16bits;
Optical isolation; Optical isolation;
High immunity;stable High immunity ;stable
From bus current consumption 45mA 45mA
From L+ current consumption 20mA 20mA
Power loss 1W 1W
Number of analog inputs 2 4
Input type· Module ground referenced RTD Module ground referenced RTD
Common-mode rejection >120dB@120V AC >120dB@120V AC
Wire loop resistance (Max) 20 Ω 20 Ω
Module update time 405ms 800ms
Data word format Resistance:0~+27648 Ω Resistance:0~+27648 Ω
Input range RTD: RTD:
Pt100,Pt200,Pt500,Pt1000,Pt10000,Ni100 Pt100,Pt200,Pt500,Pt1000,Pt10000,Ni100
Ni120,Ni1000,Cu(9.035) Ni120,Ni1000,Cu(9.035)
Resistance: 150Ω, 300Ω,600Ω Resistance: 150Ω, 300Ω,600Ω
Measuring principle Sigma→delta Sigma→delta
Resolution 15+1 Sign bit 15+1 Sign bit
Address interval - AIW
Basic error 0.1%FS 0.1%FS
Isolation (field to logic) >500V >500V
24VDC supply voltage range 20.4~28.8V DC 20.4~28.8V DC
Dimensions(W x H x D)(mm) 71.2×80×62 71.2×80×62
Order Number UN 231-7PB22-0XA0 UN 231-7PC22-0XA0
Model
EM231 2 inputs,RTD
EM231 4 inputs,RTD
Product  Description
2AI; RTD temperature measurement modules; Resolution:16bits
4AI, RTD temperature measurement modules, Resolution:16bits;
Optical isolation;
Optical isolation;
High immunity;stable
High immunity ;stable
From bus current consumption
45mA
45mA
From L+ current consumption
20mA
20mA
Power loss
1W
1W
Number of analog inputs
2
4
Input type·
Module ground referenced RTD
Module ground referenced RTD
Common-mode rejection
>120dB@120V AC
>120dB@120V AC
Wire loop resistance (Max)
20 Ω
20 Ω
Module update time
405ms
800ms
Data word format
Resistance:0~+27648 Ω
Resistance:0~+27648 Ω
Input range
RTD:
RTD:
Pt100,Pt200,Pt500,Pt1000,Pt10000,Ni100
Pt100,Pt200,Pt500,Pt1000,Pt10000,Ni100
Ni120,Ni1000,Cu(9.035)
Ni120,Ni1000,Cu(9.035)
Resistance: 150Ω, 300Ω,600Ω
Resistance: 150Ω, 300Ω,600Ω
Measuring principle
Sigma→delta
Sigma→delta
Resolution
15+1 Sign bit
15+1 Sign bit
Address interval
-
AIW
Basic error
0.1%FS
0.1%FS
Isolation (field to logic)
>500V
>500V
24VDC supply voltage range
20.4~28.8V DC
20.4~28.8V DC
Dimensions(W x H x D)(mm)
71.2×80×62
71.2×80×62
Order Number
UN 231-7PB22-0XA0
UN 231-7PC22-0XA0
EM231 4 inputs Thermocouple .............................................EM231 8 inputs Thermocouple AIW region
EM231 8 inputs Thermocouple VW region ...............................EM231 16 inputs Thermocouple VW region
Model                 EM231 4 inputs Thermocouple EM231 8 inputs Thermocouple  AIW region EM231 8 inputs Thermocouple VW region EM231 16 inputs Thermocouple
Product  Description                 4AI; 8AI; 8AI; 16AI;
Thermocouple temperature measurement modules; Resolution: 16bits Thermocouple temperature measurement modules; Resolution: 16bits                 Thermocouple temperature measurement modules; Resolution: 16bits Thermocouple temperature measurement modules; Resolution: 16bits
Optical isolation; high immunity;stable Optical isolation; high immunity;stable Optical isolation; high immunity;stable Optical isolation; high immunity;stable
Technical Specification                        
From bus current consumption                 87mA 107mA 107mA 110mA
From L+ current consumption                 60mA 60mA 60mA 40mA
Power loss                 1.8W 2.1W 2.1W 2.1W
Number of analog inputs                 4 8 8 16
Signal input type          Floating Thermocouple Floating Thermocouple Floating Thermocouple loating Thermocouple
Common-mode rejection                 >120dB@120V AC >120dB@120V AC >120dB@120V AC >120dB@120V AC
Wire loop resistance(Max)                 100 Ω 100 Ω 100 Ω 100 Ω
Module update time                 290ms  580ms  580ms 1030ms
Data word format                 Voltage:+27648~+27648 Voltage:+27648~+27648 Voltage:+27648~+27648 Voltage:+27648~+27648
Input range                 Type:E,J,K,N,R,S,T Type:E,J,K,N,R,S,T  Type: E,J,K,N,R,S,T TC Type (choice one) J,K
  Voltage range:±80mV Voltage range:±80mV Voltage range:±80mV Voltage range:±80mV
Measuring principle                 Sigma→delta Sigma→delta Sigma→delta Sigma→delta
Resolution                 15+1 Sign bit 15+1 Sign bit 15+1 Sign bit 15+1 Sign bit
Address interval                 AIW AIW VW VW
Basic error 0.1%FS 0.1%FS 0.1%FS 0.1%FS
Isolation (field to logic)                 >3000V >3000V >3000V >3000V
24VDC supply voltage range                 20.4~28.8V DC 20.4~28.8V DC 20.4~28.8V DC 20.4~28.8V DC
Dimensions(W x H x D)(mm)                 71.2×80×62 71.2×80×62 71.2×80×62 137.5×80×62
Order Number                 UN 231-7PD22-0XA0        UN 231-7PF22-0XA0  UN 231-7PH22-0XA0 UN 231-7PL22-0XA0
Model         EM231 4 inputs ThermocoupleEM231 8 inputs Thermocouple AIW regionEM231 8 inputs Thermocouple VW regionEM231 16 inputs ThermocoupleProduct  Description         4AI;8AI;8AI;16AI;Thermocouple temperature measurement modules; Resolution: 16bitsThermocouple temperature measurement modules; Resolution: 16bits         Thermocouple temperature measurement modules; Resolution: 16bitsThermocouple temperature measurement modules; Resolution: 16bitsOptical isolation; high immunity;stableOptical isolation; high immunity;stableOptical isolation; high immunity;stableOptical isolation; high immunity;stableTechnical Specification             From bus current consumption     87mA107mA107mA110mAFrom L+ current consumption      60mA60mA60mA40mAPower loss         1.8W2.1W2.1W2.1WNumber of analog inputs         48816Signal input type     Floating ThermocoupleFloating ThermocoupleFloating Thermocoupleloating ThermocoupleCommon-mode rejection         >120dB@120V AC>120dB@120V AC>120dB@120V AC>120dB@120V ACWire loop resistance(Max)         100 Ω100 Ω100 Ω100 ΩModule update time         290ms 580ms 580ms1030msData word format         Voltage:+27648~+27648Voltage:+27648~+27648Voltage:+27648~+27648Voltage:+27648~+27648Input range         Type:E,J,K,N,R,S,TType:E,J,K,N,R,S,T Type: E,J,K,N,R,S,TTC Type (choice one) J,K Voltage range:±80mVVoltage range:±80mVVoltage range:±80mVVoltage range:±80mVMeasuring principle         Sigma→deltaSigma→deltaSigma→deltaSigma→deltaResolution         15+1 Sign bit15+1 Sign bit15+1 Sign bit15+1 Sign bitAddress interval         AIWAIWVWVWBasic error0.1%FS0.1%FS0.1%FS0.1%FSIsolation (field to logic)         >3000V>3000V>3000V>3000V24VDC supply voltage range       20.4~28.8V DC20.4~28.8V DC20.4~28.8V DC20.4~28.8V DCDimensions(W x H x D)(mm)       71.2×80×6271.2×80×6271.2×80×62137.5×80×62Order Number         UN 231-7PD22-0XA0     UN 231-7PF22-0XA0 UN 231-7PH22-0XA0UN 231-7PL22-0XA0

UN 200 коммуникационные модули

Модуль интерфейса связи IM267 Profinet slave

Модуль интерфейса связи IM267 Profinet slave module представляет собой распределенный модуль ввода-вывода, разработанный Yiwei Automation.
Высокоскоростная связь Ethernet
Поддержка протокола связи Profinet master-slave
Модуль расширения un200 серии
Удобная сеть для поддержки нескольких сетевых структур
Модель IM267 Profinet slave module
Характеристики мощности
Диапазон напряжения 20,4-28,8 В постоянного тока
Максимальный ток 2А (активация коммуникационного порта модуля)
Изоляция 500 В (между входным источником питания и логической схемой)
Потребляемая мощность 2 Вт
Определение светодиодного индикатора
 НЕИСПРАВНОСТЬ PN (красный) Горит: сбой связи по шине Profinet, сеть не обнаружена
Мигает: сбой связи по шине Profinet, хост не обнаружен
ВЫКЛ: нет ошибки
ОШИБКА (красный) ON: конфигурация программного обеспечения несовместима с конфигурацией оборудования.
ВЫКЛ: нет ошибки
НЕИСПРАВНОСТЬ ШИНЫ (красный) ON: количество модулей равно 0 / модуль потерян во время связи
ВЫКЛ: нет ошибки
МОЩНОСТЬ (зеленый) ВКЛ: питание 24 В пост. тока в норме.
ВЫКЛ: нет питания
ЛВС1,2 (зеленый индикатор порта RJ45) ON: Обнаружено соединение коммутатора/ведущего PN
ВЫКЛ.: Не обнаружено соединения переключателя/ведущего PN.
ЛВС1,2 ( желтый индикатор порта RJ45 ) ON: Обнаружена передача и прием данных коммутационной/ведущей станции PN.
ВЫКЛ.: Передача и прием данных коммутационной/ведущей станции PN не обнаружены.
Расширение возможностей ввода/вывода
Максимальная конфигурация ввода/вывода Максимальная аналоговая конфигурация может достигать 112AI/28AQ.
Максимальная конфигурация цифрового количества может достигать 224DI/224DQ.
Топология Звезда, дерево, линия, кольцо
Коммуникационный порт Profinet
Коммуникационный интерфейс 1 порт связи Ethernet RJ45 Ethernet
Скорость передачи данных Скорость передачи Ethernet составляет 10 Мбит/с.
Скорость передачи Profinet 100 Мбит/с, полный дуплекс
Поддерживаемые службы Ethernet Ping, arp, сетевая диагностика (SNMP)/MIB-2, LLDP
Цикл отправки 250 мкс ~ 4 мс
Функция конфигурации оборудования
Тип файла импорта Файл описания GSD ведомого устройства Profinet в формате .XML. Пожалуйста, загрузите соответствующую информацию и инструкции с официального сайта Eway.
PN раб После добавления ведомого интерфейсного модуля UniMAT Profinet он поддерживает расширение до 7 субмодулей серии UN200 (включая стандартные цифровые, аналоговые и температурные модули).
Order part No. UN 267-0AA00-0XA0
Модель
IM267 Profinet slave module
Характеристики мощности
Диапазон напряжения
20,4-28,8 В постоянного тока
Максимальный ток
2А (активация коммуникационного порта модуля)
Изоляция
500 В (между входным источником питания и логической схемой)
Потребляемая мощность
2 Вт
Определение светодиодного индикатора
 НЕИСПРАВНОСТЬ PN (красный)
Горит: сбой связи по шине Profinet, сеть не обнаружена
Мигает: сбой связи по шине Profinet, хост не обнаружен
ВЫКЛ: нет ошибки
ОШИБКА (красный)
ON: конфигурация программного обеспечения несовместима с конфигурацией оборудования.
ВЫКЛ: нет ошибки
НЕИСПРАВНОСТЬ ШИНЫ (красный)
ON: количество модулей равно 0 / модуль потерян во время связи
ВЫКЛ: нет ошибки
МОЩНОСТЬ (зеленый)
ВКЛ: питание 24 В пост. тока в норме.
ВЫКЛ: нет питания
ЛВС1,2 (зеленый индикатор порта RJ45)
ON: Обнаружено соединение коммутатора/ведущего PN
ВЫКЛ.: Не обнаружено соединения переключателя/ведущего PN.
ЛВС1,2 ( желтый индикатор порта RJ45 )
ON: Обнаружена передача и прием данных коммутационной/ведущей станции PN.
ВЫКЛ.: Передача и прием данных коммутационной/ведущей станции PN не обнаружены.
Расширение возможностей ввода/вывода
Максимальная конфигурация ввода/вывода
Максимальная аналоговая конфигурация может достигать 112AI/28AQ.
Максимальная конфигурация цифрового количества может достигать 224DI/224DQ.
Топология
Звезда, дерево, линия, кольцо
Коммуникационный порт Profinet
Коммуникационный интерфейс
1 порт связи Ethernet RJ45 Ethernet
Скорость передачи данных
Скорость передачи Ethernet составляет 10 Мбит/с.
Скорость передачи Profinet 100 Мбит/с, полный дуплекс
Поддерживаемые службы Ethernet
Ping, arp, сетевая диагностика (SNMP)/MIB-2, LLDP
Цикл отправки
250 мкс ~ 4 мс
Функция конфигурации оборудования
Тип файла импорта
Файл описания GSD ведомого устройства Profinet в формате .XML. Пожалуйста, загрузите соответствующую информацию и инструкции с официального сайта Eway.
PN раб
После добавления ведомого интерфейсного модуля UniMAT Profinet он поддерживает расширение до 7 субмодулей серии UN200 (включая стандартные цифровые, аналоговые и температурные модули).
Order part No.
UN 267-0AA00-0XA0
EM277 PROFIBUS DP

Модуль связи 200-ой серии
1 RS485 порт
Может использоваться в системе распределенного ввода-вывода с интерфейсом PROFIBUS-DP
Скорость передачи данных RS 485 от 9,6 кбит/с до 12 Мбит/с
Оптоизоляция. Сильная и устойчивая защита от помех
Поддержка до 99 одновременных соединений типа slave
Конфигурация сети
Model EM277 PROFIBUS-DP Module
Description Be used in distributed I/O system with PROFIBUS-DP interface. Optical isolation, Stable
Module feature
Port 1
Port Type RS-485
Protocol PROFIBUS-DP
PROFIBUS-DP Speed 9.6, 19.2, 45.45, 93.75, 187.5 and 500Kbps
1.5, 3, 6 and 12Mbps
Sub-station address setting 0 to 99(setting by rotary swtich)
Max Sub-staion per Net section 32
Max Sub-station per Net 126, but just 99 EM277 Sub-station
Cable Length
Below 93.75kbps 1200 meters
187.5kbps 1000 meters
500kbps 400 meters
1-1.5Mbps 200 meters
3-12Mbps 100 meters
Input power 24V DC
Voltage range 20.4-28.8V DC
MAX. Current cosume (24VDC) 70mA
Isolation( Input power with Logic circuit) 500V
Power Supply consume
5V DC consume on BUS 150mA
Dimension (length x width x hight) 71 x 80 x 62
Order part No. UN 277-0AA22-0XA0
Model
EM277 PROFIBUS-DP Module
Description
Be used in distributed I/O system with PROFIBUS-DP interface. Optical isolation, Stable
Module feature
Port
1
Port Type
RS-485
Protocol
PROFIBUS-DP
PROFIBUS-DP Speed
9.6, 19.2, 45.45, 93.75, 187.5 and 500Kbps
1.5, 3, 6 and 12Mbps
Sub-station address setting
0 to 99(setting by rotary swtich)
Max Sub-staion per Net section
32
Max Sub-station per Net
126, but just 99 EM277 Sub-station
Cable Length
Below 93.75kbps
1200 meters
187.5kbps
1000 meters
500kbps
400 meters
1-1.5Mbps
200 meters
3-12Mbps
100 meters
Input power
24V DC
Voltage range
20.4-28.8V DC
MAX. Current cosume (24VDC)
70mA
Isolation( Input power with Logic circuit)
500V
Power Supply consume
5V DC consume on BUS
150mA
Dimension (length x width x hight)
71 x 80 x 62
Order part No.
UN 277-0AA22-0XA0
IM261 MODBUS-RTU

Модуль связи 200-ой серии
IM261 - ведомый (slave) интерфейсный модуль MODBUS-RTU, может быть сетевым и распределенным приложением ввода-вывода с ведущей системой MODBUS
1 RS485 порт
Поддержка MODBUS master system ( UN314, Siemens PLC, Scheider PLC, HMI)
Скорость передачи данных RS 485 от 9,6 кбит/с до 12 Мбит/с, настраивается автоматически
Поддержка до 99 одновременных соединений типа slave
Корректно отрабатывает оптоэлектронную изоляцию и защиту от перегрузки по току на конце RS 485
Функции конфигурации/диагностики
Конфигурация сети
Model IM261 MODBUS RTU SLAVE 
Voltage range 20.4-28.8V DC
Interface  1 RS485 port
Connecting protocol MODBUS-RTU
Station address setting 0 to 99(by knob switch)
Max. stations per period 32
Max. stations per net 126,Max. 99 EM261 stations
Baud rate 2400、4800、9600、19200、38400、57600、115200 bit/s
UN 200 modules max 7 pcs, not support intelligent modules.
Cable length
< 93.75Kbps  1200 meters
187.5Kbps 1000 meters
500Kbps 400 meters
1-1.5Mbps 200 meters
3-12Mbps 100 meters
Dimension 71*80*62
Order part No.  UN 261-0AA22-0XA0
Model
IM261 MODBUS RTU SLAVE
Voltage range
20.4-28.8V DC
Interface
1 RS485 port
Connecting protocol
MODBUS-RTU
Station address setting
0 to 99(by knob switch)
Max. stations per period
32
Max. stations per net
126,Max. 99 EM261 stations
Baud rate
2400、4800、9600、19200、38400、57600、115200 bit/s
UN 200 modules max
7 pcs, not support intelligent modules.
Cable length
< 93.75Kbps
1200 meters
187.5Kbps
1000 meters
500Kbps
400 meters
1-1.5Mbps
200 meters
3-12Mbps
100 meters
Dimension
71*80*62
Order part No.
 UN 261-0AA22-0XA0

Контакты
Адрес: 350901, г. Краснодар, ул. Первомайская 58
тел./факс+7 (861) 215-87-65, 215-87-68
e-mail: ars@ars-yug.ru
Made on
Tilda